Cart-Based Multi-Item Sorter and Hybrid Storage

The CartMIS V3 is an advanced, complete cart-based storage system for Minecraft Java Edition that processes items at up to 16 times standard hopper speed. It combines 216 single-item hybrid bulk loaders, 32 1-wide tileable multi-item sorters, and 16 non-stackable item sorters into one cohesive main storage hall. Because it transports and filters items using hopper minecarts on a 32-game-tick clock, it eliminates open item lag and prevents despawning.

Item CircuitsExpertJava Edition
Cart-Based Multi-Item Sorter and Hybrid Storage video tutorial

Video: It just keeps getting better! [Cart-Based Multi-Item Sorter + Hybrid Storage] by RaPsCaLLioN1138

How to build it

  1. Build the 16x Speed Input and Box Unloader

    Set up the input chest and fast shulker box unloader, which drains items using a large queue of hopper minecarts. Connect a 32-game-tick clock to dispatch loaded carts into the system and wire an automatic lock to pause the input when the cart queue runs low.

  2. Construct the Pre-Sorter

    Route the dispatched carts over a pre-sorting hopper that pulls a single item from the cart to test its type. Configure the logic so stackable items are returned to the cart (leaving 1 item in slot one and up to 63 in slot five), while shulker boxes, non-stackables, and empty carts are diverted to their own tracks.

  3. Install the Hall Whitelisters

    Build the blockerless CartMIS V2 whitelisters at the entrance of each single-item hybrid hall. Each whitelister checks if a passing cart matches any item assigned to that hall side and routes matched carts up an elevator Directly to that hall.

  4. Set Up 1-Wide Single-Item Cart Filters

    Along the top of the hybrid halls, build the 1-wide tileable single-item cart filters using a filter hopper, a comparator, and a piston over Soul Sand. Lock the hopper minecarts with an activator rail beforehand so they don't pull filter items, allowing the filter hopper to pull one matching item, push the cart over the Soul Sand to snap onto the lower rail, and drop the item right back into the cart.

  5. Build the 1-Wide A/B Tileable Cart Queues

    Below the filters, construct the in-slice cart stacking queues using a sticky piston left extended by default so adjacent carts don't disrupt each other's momentum. Wire the bottom unloading hopper to call the next cart from the queue and break ('yeet') it to drop its contents via stack separation once the previous batch finishes draining.

  6. Assemble the Hybrid Bulk Loaders

    Under each single-item cart queue, build the hybrid storage slice consisting of an accessible loose-item chest feeding into a shulker box loader and a dropper. Place a zero-ticked composter above the shulker box position to break full boxes into the hopper below, and connect an empty shulker box supply line.

  7. Build the Blocker Configurator for Multi-Item Sorting

    Route carts that bypass all single-item hall whitelisters into the blocker configuration line. Use hoppers and droppers to fill the cart's empty middle slots with temporary blockers, then pull them out one by one while inserting true stackable blockers so only slots one and five hold the sorted item.

  8. Construct the CartMIS V3 AccessibleSlices

    Build the 1-wide tileable multi-item sorter slices with an accessible filter chest in front where players place layout items. Run the configured carts beneath the filter chest; when a cart pulls a matching item from the chest, the comparator signal drops, turning off a redstone torch and extending a piston that redirects the cart to snap up and receive its item back.

  9. Add the Blocker Removal Filter and Elevators

    After the multi-item whitelister, route the matched cart through a first elevator and slow its momentum over a filter hopper that extracts all blockers and ejects them into a return water stream. Send the cleaned cart up a second elevator into the in-slice cart queue to unload into the slice's storage chests.

  10. Connect the Unstackable Sorter and Overflow

    Link the non-stackable output track from the pre-sorter to the non-stackable item sorter (which separates armor, tools, and minecart variants). Route any unrecognized stackables, unrecognized non-stackables, and empty shulker boxes to dedicated overflow chests at the front of the hall.

  11. Wire the Indicator Panel and Chunk Loaders

    Next to the main input, wire a redstone lamp indicator panel to display system activity, input lock status, overflow warnings, and low-stock alerts for shulker boxes and armor-sorting arrows. Finally, hook up automatic chunk loaders that activate whenever hopper minecarts are dispensed into the sorting tracks.

How it works

The CartMIS V3 processes items at up to 16x hopper speed by transporting stacks inside hopper minecarts dispatched every 32 game ticks:

  • Input & Pre-Sorting: Loose items and full shulker boxes are rapidly drained by a queue of hopper minecarts that are broken ("yeeted") to dump their items into sorting carts. The pre-sorter pulls one item from each cart to check its properties. If stackable, the item is returned so the cart holds 1 item in slot 1 and up to 63 items in slot 5. Shulker boxes and unstackables are routed away.
  • Hall Whitelisting & Single-Item Filtering: Stackable carts pass through blockerless whitelisters that check which hall aisle contains their item. In the assigned aisle, locked carts roll over 1-wide tileable filters. When a filter hopper pulls a matching item from the cart, its redstone-comparator output increases, pulsing a piston that pushes the cart over Soul Sand. The cart snaps onto a lower rail where the hopper immediately pushes the item back into the cart and drops it into the slice's queue.
  • Cart Queuing & Hybrid Loading: Carts wait in a 1-wide A/B tileable vertical stack held stable by an extended sticky-piston. When the slice's receiving hopper empties, it calls a cart and breaks it via stack separation. Items fill an accessible chest first, while excess items flow into a shulker box. If you take loose items from the chest, the active shulker box automatically refills it. Once the box and backing dropper fill up, a zero-ticked composter breaks the shulker box for bulk storage.
  • Blocker Config & CartMIS V3: Carts that don't match any bulk hall are prepped with slot blockers in slots 2, 3, and 4. They then pass under the CartMIS V3 filter chests. Because the sorted item is split across slots 1 and 5, the unlocked cart has room to pull a matching item directly out of the filter chest above it. This drops the chest's comparator signal strength, turning off a redstone-torch and extending a piston. The cart rides up a sloped rail to return the stolen filter item, passes over a filter hopper that strips out the blockers (spitting them into a water stream for reuse), and enters the slice's cart queue to unload.

Tips & variations

  • Keep Shulker Boxes Stocked: The hybrid bulk loaders require a steady supply of empty shulker boxes. Running completely out will soft-lock any slice that tries to dispense a new box, requiring you to refill the supply and manually reset the affected slice.
  • Refill Arrows for Armor Sorting: The non-stackable sorter uses arrows to differentiate armor pieces. Watch the indicator panel near the input and top up the arrow supply chest when the warning lamp turns on.
  • Use Chunk Loaders: Because cart-based systems rely on precise momentum and 32gt timing, unloading the chunks mid-sort will break cart alignments. Always ensure the automatic chunk loaders are active before walking away or entering portals.
  • World Download Recommended: Due to the massive scale and tight sub-system wiring (32 MIS slices, 216 hybrid slices, and 16 unstackable sorters), use the creator's world download or Litematica schematics found in the video description to inspect exact repeater delays and rail orientations.

Frequently asked questions

How fast does the CartMIS V3 sort items?
The input dispatches a hopper minecart every 32 game ticks (1.6 seconds), giving the system a sorting speed of up to 16x standard hopper speed.
What is a hybrid storage loader?
A hybrid loader gives you immediate access to loose items in a regular chest as well as packed shulker boxes of that same item below. Taking loose items from the top chest automatically pulls replacement items out of the shulker box currently being filled.
Can the input be overloaded with too many items?
No. The input is wired to automatically lock itself whenever the internal hopper minecart queue runs low, keeping items safely inside containers so entities never sit out and despawn.
Does this storage system work on Minecraft Bedrock Edition?
No, this system is built for Minecraft Java Edition (1.19+) and relies heavily on Java-specific minecart physics, rail snapping, stack separation cart yeeting, and zero-tick composter box breaking.

Components used

More storage system