Redstone Torch

The redstone torch is a constant power source and signal inverter that emits a level 15 redstone signal to adjacent components and strongly powers a solid block directly above it. It remains active by default and turns off whenever the block it is attached to becomes powered. With a 1-redstone-tick delay, it is a fundamental component for NOT gates, vertical signal transmission, and logic circuits.

Power SourcesBeginnerSignal strengthPulse shapingClocks & timing

How the Redstone Torch Works

By default, a placed redstone torch is active (lit=true) and emits a full-strength redstone signal of 15. It acts as a natural signal inverter: if the block the torch is attached to receives power of any level (1 to 15), the torch turns off (lit=false) and its output drops to 0.

While active, a redstone torch affects its surroundings in specific ways:

  • Adjacent Dust: Powers redstone dust next to it—and directly beneath it if mounted on the side of a block—to power level 15.
  • Repeaters and Comparators: Powers adjacent repeaters and comparators facing away from the torch to level 15.
  • Block Above: Strongly powers a full, solid, opaque block directly above it to power level 15. It does not power solid blocks next to it or below it.
  • Mechanisms: Activates adjacent mechanism components (such as pistons, droppers, or redstone lamps) situated next to, above, or below the torch.
  • Attached Block Exception: A redstone torch never powers or activates the block it is attached to, even if that block is a mechanism like a redstone lamp or dispenser.

Delay and Burn-Out Mechanics

A redstone torch takes 1 redstone tick (2 game ticks, or 0.1 seconds barring lag) to change its state from on to off or off to on. Because of this delay, it typically does not respond to 1-tick power fluctuations.

If a circuit forces a redstone torch to toggle its state more than eight times in 60 game ticks (three seconds), the torch experiences burn-out:

  • It emits a smoke particle and plays a hissing sound, then turns off.
  • While burned out, it ignores all incoming changes until the count of state changes in the last 60 game ticks drops below eight.
  • Once cooled down, it requires a block update or a redstone update (one that would not normally keep it off) to turn back on.
  • A single torch can burn out an unlimited number of times without breaking.

Placement and Support Rules

Redstone torches can be attached to the top or sides of any full, solid, opaque block—including full-block mechanisms like droppers, dispensers, note blocks, and redstone lamps. They can also be placed on the top or sides of certain transparent or non-full blocks, though they can never be attached to the underside of any block.

If you aim at an invalid surface while placing a torch, the game may automatically snap the torch to an adjacent valid surface sharing that air space (for instance, aiming at the side of a fence on the ground places the torch on the ground block next to the fence).

A placed redstone torch breaks instantly with any tool or bare hands, and pops off as an item if:

  • Its supporting block is moved, removed, or destroyed.
  • A piston tries to push the torch or pushes another block into its space.
  • Water or lava flows into the block space it occupies.

Common Circuits and Uses

  • NOT Gate (Inverter): Running powered redstone dust, a repeater, or a lever into the block holding a redstone torch inverts the signal from ON to OFF and vice versa.
  • Vertical Torch Tower: Because an active torch strongly powers the solid block directly above it, placing another torch on top of that block turns the upper torch off. Stacking alternating blocks and torches creates a compact upward signal transmitter (adding 1 redstone tick of delay per torch).
  • Crafting Component: Beyond wiring, redstone torches are essential crafting ingredients for making redstone repeaters, redstone comparators, and activator rails.
  • Natural Generation: You can find a single redstone torch inside every igloo, and multiple torches within the redstone circuitry underneath ancient cities.

Tips and Common Mistakes

  • Torches on Unpowerable Blocks Cannot Turn Off: Although you can place a redstone torch on certain non-solid blocks like glass, slabs, stairs, walls, fences, and hoppers, those blocks cannot be powered by redstone. A torch attached to them will stay permanently lit and cannot be inverted.
  • Self-Powering Short Circuits: If you place a solid block above a wall-mounted torch and put redstone dust on the block holding the torch, the powered upper block can feed power back into the support block. This creates a rapid feedback loop that quickly burns out the torch.
  • Attached Mechanisms Won't Activate: Attaching a torch directly to the side or top of a piston, dropper, or redstone lamp will not activate that component. Power the block next to it or run the torch into dust instead.

Frequently asked questions

Why does my redstone torch hiss, smoke, and stop working?
Your redstone torch has burned out because it toggled on and off more than eight times within three seconds (60 game ticks). This usually happens when a torch accidentally powers the block it is attached to, creating a rapid feedback loop. It will stay off until the cooldown period passes and it receives a block or redstone update.
Why won't my redstone torch turn off when I power the block?
To turn off a redstone torch, its attachment block must be a full, solid, opaque block capable of being powered. Torches placed on glass, slabs, stairs, hoppers, walls, or fences cannot be deactivated because those blocks cannot hold redstone power.
How much delay does a redstone torch add to a circuit?
A redstone torch adds 1 redstone tick (2 game ticks, or 0.1 seconds) of delay whenever it switches from on to off or off to on.
Does a redstone torch power the block it is placed on?
No. A redstone torch never powers or activates the block it is attached to. It only strongly powers a solid block directly above it and activates components adjacent to it.

Related components