Tripwire Hook

A tripwire hook is a redstone detector that emits a full-strength signal when entities pass through a connected line of string. Paired with a second opposing hook up to 40 blocks away, it forms a tripwire circuit capable of detecting players, mobs, and dropped items across wide areas. When triggered, both hooks power their attached blocks as well as adjacent redstone components.

Power SourcesBeginnerSignal strengthPulse shaping

How Tripwire Hooks Work

A single tripwire hook does nothing on its own; it must form a valid tripwire circuit. A valid circuit requires two hooks attached to opposing blocks facing each other, connected in a straight, unbroken line by 1 to 40 blocks of placed string (tripwire).

  • Visual states: An unconnected hook appears folded up (attached=false). When linked across a valid line of string to another hook, both hooks extend straight out (attached=true).
  • Hitbox change: Unconnected string has a 0.5-block-tall hitbox resting on the ground. Once connected between two hooks, the tripwire's hitbox shrinks to 3/32 (0.09375) blocks tall, floating 1/16 (0.0625) blocks above the surface beneath it.
  • Power output: While activated (powered=true), the hook tilts downward. Both hooks in the circuit strongly power the block they are attached to at power level 15, power any adjacent redstone dust (including underneath the hook) to 15, power repeaters or comparators facing away from them, and activate any adjacent mechanism components above, below, or beside them.
  • String power: The tripwire string itself never emits redstone power, though its block state changes when stepped on and can be read directly by an observer.

Activation & Disarming Mechanics

A connected tripwire circuit activates whenever an eligible entity intersects the hitbox of the tripwire string (touching only the hook block does not trigger it). The signal remains active until all entities leave or are removed from the entire string line.

  • Detected entities: Players, mobs, dropped items, and most other entities trigger the wire.
  • Ignored entities: Thrown potions, thrown ender pearls, thrown eyes of ender, fireworks, and certain arrows pass through without activating the circuit.
  • Breaking the wire: If any string block in an armed circuit is broken, both hooks emit a 5-redstone-tick pulse (0.5 seconds).
  • Disarming with shears: Breaking the tripwire using shears sets the string's disarmed state and disconnects the circuit without triggering a redstone pulse. Similarly, breaking a tripwire hook directly—or mining the block it is mounted on—does not produce a pulse.

Placement & Configuration Rules

Tripwire hooks can be placed on the side of a support block facing north, south, east, or west. The string between them can rest on the ground or float in mid-air.

  • Parallel & intersecting lines: Multiple separate tripwire lines can be built directly next to one another in parallel, stacked vertically above each other, or even crossing through each other at right angles without interfering.
  • Fragility: A tripwire hook pops off and drops as an item if its support block is removed or moved, if water flows into its space, or if a piston attempts to push it. Flowing lava destroys the hook completely without dropping the item.

Common Redstone Uses & Tricks

  • Wide-Area Entity Detection: Unlike pressure plates that only cover a single block, one pair of hooks can monitor a doorway, hallway, or mob farm drop chute up to 40 blocks wide at any height above the floor.
  • Jungle Temple & Base Traps: Naturally found in jungle temples wired to hidden dispensers, hooks can sit flush against walls while nearly invisible string runs across the floor to trigger dispensers, pistons, or TNT.
  • Anti-Shear Observer Alarm: While cutting string with shears suppresses the hook's 5-tick redstone output, the hook still changes its block state from attached=true to attached=false. Pointing an observer at either the tripwire hook or the string will still output a pulse if an intruder tries to disarm the trap with shears.
  • Crafting Component: Outside of direct wiring, tripwire hooks are required to craft trapped chests (another redstone input component) and crossbows.

Tips & Common Mistakes

  • Exceeding 40 blocks: If your hooks stay folded after placing all the string, count the gap. Any string line longer than 40 blocks will fail to arm.
  • Powering from the string: Beginners often place redstone dust or mechanisms next to the string expecting a signal. Only the two hooks at the ends (and the two blocks they are mounted on) emit redstone power—unless you read the string with an observer.
  • Water flushing traps: Because flowing water breaks both tripwire hooks and string, keep water streams and flushing mob farm dispensers on a separate level from your detection wires.

Java vs Bedrock

TopicJava EditionBedrock Edition
Master Fletcher villager tradeHas a chance to offer buying 8 tripwire hooks for 1 emerald (stock of 12).Always offers to buy 8 tripwire hooks for 1 emerald at Master level (stock of 12).

Frequently asked questions

What is the maximum length of a tripwire in Minecraft?
A valid tripwire line can be between 1 and 40 blocks of string long, with a tripwire hook attached to a block at each end.
How do you disarm a tripwire without triggering it?
Break the string using shears, or break either of the tripwire hooks (or the blocks they are attached to) directly. Watch out for observers watching the hook or string, as shears still cause a block state change from attached=true to attached=false.
Does the string in a tripwire circuit give off redstone power?
No. Only the tripwire hooks at each end and the blocks they are attached to emit power level 15. However, an observer can detect the string's state changing when an entity touches it.
What entities do not trigger a tripwire hook?
Thrown potions, thrown ender pearls, thrown eyes of ender, fireworks, and some arrows pass through tripwire without activating the circuit.

Related components