Hopper

A hopper is a 5-slot storage block and redstone component that collects floating item entities from above and moves items between containers. When powered by a redstone signal, the hopper locks and stops all item collection, pulling, and pushing. Paired with redstone comparators, hoppers form the backbone of item sorters, timers, and automated farms.

Item HandlingBeginnerComparator logicItem countingClocks & timingSignal strength

How Hoppers Work

While unpowered (enabled=true), a hopper performs three operations in a specific order during a single game tick:

  1. Push: It attempts to push a single item from its own inventory into the container its output nozzle faces.
  2. Pull: It checks if the block directly above it is a container. If so, it attempts to pull a single item from that container into its own inventory.
  3. Collect: If there is no container above it, the hopper scans the 1-block space above it for free-floating item entities and collects them in groups all at once.

After pulling or pushing an item—or receiving an item pushed into it by another hopper—a hopper enters a 4-redstone-tick (0.4 second) transfer cooldown before it can push or pull again, resulting in a standard transfer rate of 2.5 items per second. Collecting floating item entities does not trigger or depend on the transfer cooldown.

Hoppers always prioritize slots from left to right. When pulling, a hopper prioritizes taking from the first non-empty slot of the source container over filling its own first slot. Similarly, when pushing, it pushes from its own leftmost occupied slot into the first valid slot of the target container.

Placement and Configuration

A hopper's output tube can point in five directions (down, north, south, west, or east) and never faces upward. To aim the output nozzle at a specific container, look directly at the target surface when placing the hopper. Because right-clicking a container normally opens its GUI, you must sneak while placing to attach a hopper against an interactive block like a chest, furnace, or another hopper. Placing a hopper against the underside of a block defaults its output to face straight down.

Once placed, a hopper does not change its direction even if the target container is broken or replaced. Although a hopper is not a full solid block, you can still place redstone dust, repeaters, comparators, rails, levers, and tripwire directly on its top surface (sneaking is required).

You can rename a hopper in an anvil prior to placement to change its GUI header from the default "Item Hopper". In Java Edition, mapmakers can also rename or lock the GUI using the /data merge block command with the CustomName or Lock NBT tags.

Redstone Locking and Comparator Signals

When a hopper receives redstone power—whether directly from an adjacent power source or through a soft-powered solid block—its state changes to enabled=false, which is commonly called locked. A locked hopper stops collecting, pulling, and pushing items. When the redstone signal turns off, the hopper waits 1 redstone tick before resuming item transfers.

Note that locking a hopper only stops its own actions. Another unlocked hopper above it can still push items into it, and an unlocked hopper below it can still pull items out of it. Because of this:

  • To stop item flow in a horizontal hopper pipe, you only need to lock a single hopper in the line.
  • To stop item flow in a vertical hopper pipe, you must lock two vertically adjacent hoppers simultaneously to stop both the top hopper from pushing and the bottom hopper from pulling.

A redstone comparator placed next to a hopper (facing away from it) measures how full the hopper is, emitting a signal strength from 0 (completely empty) to 15 (all 5 slots completely full). A single item that stacks to 64 or 16 produces a signal strength of 1, whereas a single non-stackable item (such as a tool, weapon, or shulker box) produces a signal strength of 3.

Container Interactions

Hoppers interact with different storage and utility blocks based on which face the hopper connects to:

  • Furnaces, Blast Furnaces & Smokers: A hopper pointing into the top face inserts items into the smelting ingredient slot (it will push any item, even non-smeltable ones). A hopper pointing into any side face only inserts valid fuel into the fuel slot. A hopper underneath pulls smelted items from the output slot as well as empty buckets left over from lava fuel in the fuel slot. Experience remains stored inside the furnace until a player manually takes an item or breaks the furnace.
  • Brewing Stands: Top hoppers insert valid brewing ingredients into the top slot. Side hoppers insert Blaze Powder or filled bottles into their respective slots. Bottom hoppers immediately pull bottles out of the three brewing slots—even if brewing is incomplete—so the bottom hopper must be locked with redstone until brewing finishes.
  • Composters: Top hoppers push compostable items in, advancing the fill level. Bottom hoppers pull out Bone Meal once the composter reaches stage 8. Side hoppers do not interact with composters.
  • Chests & Trapped Chests: Large chests are treated as one unified 54-slot inventory. Note that opening a trapped chest powers adjacent hoppers, locking them while a player looks inside.
  • Shulker Boxes: Hoppers fill and empty shulker boxes normally, but cannot push a shulker box inside another shulker box.
  • Chiseled Bookshelves & Jukeboxes: Hoppers can insert and extract books from bookshelves, and can insert music discs into jukeboxes and pull them out once the song finishes.
  • Minecarts & Boats: Hoppers interact with Boats with Chests, Chest Minecarts, and Hopper Minecarts whenever their hitbox enters the hopper's target or collection area.
  • Incompatible Blocks: Hoppers cannot interact with Ender Chests or move books onto or off of Lecterns.

Common Redstone Uses

  • Item Sorters (Filters): By reading a hopper with a comparator and locking the hopper below it with a redstone torch, players can fill the top hopper's 5 slots with a specific item pattern so that it only reaches signal strength 3 when a matching item enters.
  • Shulker Box Separators: Because hoppers refuse to push shulker boxes into other shulker boxes, pointing a hopper into a shulker box naturally filters out shulker boxes from regular items.
  • Hopper Clocks (Ethonian Clocks): Two hoppers facing into each other transfer items back and forth at 2.5 items per second. Comparators read the two hoppers to flip a sticky piston or latch, creating an easily adjustable, long-period redstone timer.
  • Through-Block Collection: Because a hopper collects floating items from the entire 1-block space above it, it can pull items resting on top of non-full blocks like Soul Sand, Carpets, or Mud, as well as items trapped inside full solid blocks.

Tips, Tricks & Common Mistakes

  • Vertical Pipe Comparator Blindness: Avoid placing comparators on the middle hoppers of a vertical hopper chain. When a hopper pushes an item down into a vertical pipe, the hopper below pulls that item out in the very same game tick. Because a comparator requires an item to stay inside for at least 1.5 redstone ticks to register, middle vertical hoppers often output a signal of 0 even during a continuous stream of items. Read horizontal hoppers instead.
  • Double Speed in Vertical Pipes: If a stack of items is already inside a vertical hopper pipe, items move downward at 5 items per second (twice the normal rate) because the upper hopper pushes an item down in the same tick that the lower hopper pulls an item down.
  • Accidentally Locking Hoppers with Detector Rails: You can place rails directly on top of hoppers to unload minecarts, but placing a Detector Rail on top of a hopper will power and lock the hopper as soon as a minecart rolls over it, preventing the hopper from pulling items.
  • Reducing Hopper Lag: In Java Edition, open hoppers constantly scan the space above them for floating item entities. Placing a Composter on top of unused collection hoppers disables the entity scan and swaps it for a lightweight inventory check (avoid using double chests on top, which actually worsen performance due to their 54 slots). Conversely, in Bedrock Edition, placing containers on top of hoppers increases lag because the hopper begins scanning chunk entity lists for container minecarts; leave solid blocks or air above hoppers in Bedrock.

Java vs Bedrock

TopicJava EditionBedrock Edition
Collection CooldownNo collection cooldown; hoppers check for and collect floating item entities every game tick independently of transfer cooldowns.Has a 4-redstone-tick (0.4 second) collection cooldown after picking up an item entity or stack before it can collect floating items again.
Dropped Item Collection OrderCollects multiple dropped items in the exact order they landed on the hopper, and remembers this order even while locked.Does not remember landing order; collects items in the order they entered the chunk (or in a random order when dropped from a broken armor stand).
Lag Optimization (Capping Hoppers)Placing composters on top of hoppers reduces processing lag (MSPT) by disabling floating item entity checks.Leaving air or non-container solid blocks on top of hoppers performs better than topping them with containers, as container-topped hoppers scan chunk entities for minecarts.

Frequently asked questions

Why isn't my hopper picking up or moving items?
Your hopper is likely locked by a nearby redstone signal. Check for adjacent redstone torches, levers, detector rails, active trapped chests, or powered solid blocks touching the hopper. Also verify that the container above it isn't blocking floating item collection.
How fast do hoppers transfer items in Minecraft?
A standard hopper transfers 1 item every 4 redstone ticks (0.4 seconds), which equals 2.5 items per second. However, a hopper collects floating item entities from the world in full stacks all at once.
How do you point a hopper into a chest without opening the chest?
Hold the Sneak key (Shift by default on PC) while right-clicking the side of the chest or container you want the hopper's output tube to connect to.
Why doesn't my comparator turn on when items go down a vertical hopper pipe?
In a vertical chain, the bottom hopper pulls an item out in the same game tick that the top hopper pushes it in. Because comparators need an item to stay in a hopper for at least 1.5 redstone ticks to detect it, the item moves too quickly to be read.
Does placing blocks on top of hoppers reduce lag?
In Java Edition, placing a Composter on top of a hopper reduces lag because the hopper stops scanning for floating item entities. In Bedrock Edition, however, you should use regular solid blocks or air above hoppers, as containers on top cause extra lag from minecart entity checks.

Related components