Shulker Box Loader and Unloader

A Shulker Box Loader automatically packs bulk items from farms or auto-crafters into shulker boxes, breaking and storing each box the moment it fills up. Paired with a Shulker Box Unloader, which drains full boxes into your main sorting system and separates the empty boxes, these compact 4x4x2 circuits handle all your bulk storage in Minecraft Bedrock without ever losing a shulker box.

Item CircuitsBeginnerBedrock Edition
Shulker Box Loader and Unloader video tutorial

Video: EASY Shulker Box Loader & Unloader Tutorial! Minecraft Bedrock | MCPE Xbox PC Switch PS5 by silentwisperer

How to build it

  1. Loader: Place Output Chest and Mud Block

    Dig a 1-block-deep trench for a double chest to collect your filled shulker boxes. Attach a hopper leading into the back of the chest, and place a mud block directly on top of that hopper.

  2. Loader: Add Dispenser and Downward Piston

    Place a dispenser behind the mud block facing forward over the mud. Leave a 1-block gap above the mud block (where the shulker box will sit) and place a regular piston above that gap facing downward.

  3. Loader: Build Comparator Full-Box Detector

    To the right of the shulker box gap, place a solid block with a comparator on top reading out of the shulker space. Place a solid block in front of the comparator and another block beside the piston.

  4. Loader: Wire the Subtraction Lever and Torch

    Put redstone dust next to the comparator and on top of the block in front of it. Attach a lever to the bottom block under the side dust and flick it on so the comparator only triggers at signal strength 15, then place a redstone torch on the side of the upper block to power the dispenser.

  5. Loader: Add Item and Empty Box Inputs

    Feed a hopper into the dispenser from a back chest for your empty shulker boxes. Place a second hopper feeding from the left side into the air gap above the mud block with a chest on top for the items you want loaded, and put a starter button on the dispenser.

  6. Unloader: Set Up Dual Output Chests and Hoppers

    For the 4x4x2 unloader, place two chests side-by-side in the ground: the left chest for empty shulkers and the right chest (or hopper line) for unloaded items. Place a downward-facing hopper on top of each chest.

  7. Unloader: Place Piston, Comparator, and Dispenser

    Above the right hopper, leave a 1-block gap for the shulker box and place a regular piston to the right facing left into that gap. To the left of the gap, place a solid block with a comparator reading the shulker space into another solid block, then place a redstone torch on the back of that block and a dispenser behind the shulker gap facing forward.

  8. Unloader: Install the Observer Pair and Torch

    Place an upward-facing observer directly in front of the comparator output block, then place a second observer above it looking sideways into the first observer. Put a solid block behind the top observer and a redstone torch directly above the piston.

  9. Unloader: Add Powder Snow Dispenser and Hopper Lock

    Attach a downward-facing dispenser to the side of the upper redstone torch (directly above the shulker space) and put a Powder Snow Bucket inside it (or use a Water Bucket with a stair block). Run two redstone dust behind the lower torch into a solid block next to the right-side item hopper to lock it while boxes break.

  10. Unloader: Attach Input Hopper and Start Button

    Connect a hopper and chest to the back or top of the shulker-placing dispenser to supply full shulker boxes. Place a button on the side of the piston (or on a block next to it) and press it to dispense and drain your boxes.

How it works

Both circuits use comparator signal strength to detect exact container states without losing items:

  • Shulker Box Loader: When a shulker box rests on top of the mud block, the side comparator reads how full it is. Because the switched-on lever feeds signal strength 15 into the comparator's side, the comparator stays off until the shulker box is 100% full (also strength 15). At that moment, the comparator outputs a signal that powers the downward piston to break the box and turns off the redstone torch. Because a mud block is slightly shorter than a full block, the hopper beneath it immediately pulls the dropped shulker box through the mud before it can fly away. Once the piston retracts, the redstone torch turns back on and triggers the dispenser to place a fresh empty shulker box.
  • Shulker Box Unloader: Pressing the start button dispenses a full shulker box above the right-hand item hopper. As items drain into the hopper below, the comparator monitors the box. The moment the final item leaves the shulker box, the comparator turns off, allowing the back redstone torch to turn on. This triggers the observer chain and upper dispenser (using powder snow or water) alongside the piston to break the empty box while simultaneously powering the dust line at the back to lock the right-hand item hopper. Because the right hopper is locked, the broken empty shulker box is pulled into the left-hand hopper and chest instead, while the dispenser automatically places the next full shulker box.

Tips & variations

  • Double-Speed Loading: You can place a second input hopper feeding into the front of the shulker box gap on the loader to pack items at 2x hopper speed, though this blocks you from manually opening the box while it fills.
  • Optional Built-In Item Filter: You can attach a compact Bedrock item sorter directly to the left side of the loader using a composter filled with 1 layer of compost and a bottom comparator set to subtract mode. Fill the top filter hopper with 18 target items in the first slot and 4 renamed filler items in the remaining slots, and make sure to remove any leftover items trapped in the lower hopper after building.
  • No Powder Snow Variant: If you don't have a Powder Snow Bucket for the unloader's top dispenser, place a Water Bucket inside that dispenser instead and enclose the top with two solid blocks and a stair block so the waterlogged space breaks/flushes without spilling.
  • Chunk-Border Safe: Both designs are compact (4x4x2) and chunk-border proof, so shulker boxes will not get deleted or pop out across chunk lines.

Frequently asked questions

Why does the shulker loader use a mud block on top of the output hopper?
Mud is slightly shorter than a full solid block, which allows the hopper underneath to suck in the broken shulker box through the block instantly so zero boxes are ever lost.
How do I start the shulker loader for the first time?
Load empty shulker boxes into the back input and press the button on the dispenser once to place the first shulker box. After that, the circuit automatically dispenses a new box every time one fills up and breaks.
Can I open the shulker box while the loader is filling it?
Yes! Because the front of the single-speed loader is open and a regular piston sits above it, you can open the shulker box at any time to grab items or break it manually.
What if I don't have a Powder Snow Bucket for the shulker box unloader?
You can substitute a regular Water Bucket inside the upper dispenser and place a stair and two solid blocks around it to contain the water.

Components used

More storage system