4-Sided Working Clock Tower

A functional redstone clock tower displays the current in-game time across all four cardinal directions using a rotating 12-hour piston feed tape and redstone lamps. This Java Edition mechanism includes an automatic daylight-detector reset function, ensuring your clock resynchronizes itself at 6:00 AM and 6:00 PM even after you sleep in a bed or unload the chunks.

Displays & LightingAdvancedJava Edition
4-Sided Working Clock Tower video tutorial

Video: (BUG FOUND) 4-Sided Working Redstone Clock Tower — Fully Functional with Auto-Reset by JoWiBro

How to build it

  1. Build the 12-Hour Lamp Face

    Elevate at least 6 blocks off the ground and arrange 12 Redstone Lamps in a ring (3 lamps on each of the four sides with the corners removed) to represent the 12 hours. Optionally, place a lamp in the very center with a Block of Redstone behind it for constant decoration.

  2. Load the Piston Tape

    Directly behind the 12 outer lamps, place a Block of Redstone at the 6 o'clock position. Fill the remaining ring spaces with non-conductive blocks like Waxed Cut Copper Slabs (leave one corner empty until the end so the tape can be pushed).

  3. Install Top and Right Tape Pistons

    Set up observers watching the inner track leading into regular Pistons at the corners to push the top row across and the right column downward. Place Obsidian blocks behind the four outer corners of the tape track as a safety stop.

  4. Add Bottom and Left Return Pistons

    At the bottom corner, use an Observer feeding a Redstone Repeater set to 3 ticks (two right-clicks) to power a Sticky Piston holding a Smooth Stone Slab, along with upward-facing observers and a Sticky Piston to push the left column back to the top.

  5. Build the Pulse Input and Target Assembly

    At the bottom drive corner, place a regular Piston facing down, then build up from below with a regular Piston, an outward-facing Observer, and a Target block with a single piece of Redstone Dust next to it. Run a vertical line of downward-facing Observers beside it to serve as the hourly tick input.

  6. Wire the Copper Bulb Reset Latch

    Place a Waxed Oxidized Copper Bulb against the Target block with an Observer watching it, followed by a second Copper Bulb and another Observer feeding directly into the bottom Sticky Piston. Put a Stone Button on the bulb as an optional manual reset cancel.

  7. Connect the Moonlight Auto-Reset

    Extend a small platform underneath the center and place a Daylight Detector switched to blue moonlight mode. Run its output through a Redstone Repeater watched by an Observer leading into the reset check at the 6 o'clock position, then place the final slab into the piston tape.

  8. Duplicate for All Four Sides

    Build three more identical clock face modules rotated in the remaining cardinal directions, aligning all four modules around the single central Daylight Detector so that every face checks and resets together.

  9. Construct the Calibrated Hopper Clock

    Below the four faces, build an Etho-style hopper clock using two Hoppers facing each other, two Redstone Comparators, two Sticky Pistons, a Block of Redstone, and a Lever to lock the hoppers for maintenance. Load the hoppers with 1 stack of 64 plus 62 items (126 items total) to produce approximately 1,000 game ticks per cycle.

  10. Link the Ticker to All Four Faces

    Place an Observer watching the hopper clock output and split the signal evenly across four observer branches rising into the vertical input lines of all four clock faces, then unpause the lever to start the clock.

How it works

Each of the four clock faces is driven by a 12-position piston feed tape sitting directly behind a ring of 12 Redstone Lamps. Eleven slots in the tape are filled with non-conductive slabs, while one slot holds a Block of Redstone that illuminates the current hour lamp.

  • Hourly Tick: A Minecraft day lasts 24,000 game ticks, so a 12-hour clock must advance once every 1,000 game ticks. The Etho hopper clock at the base holds 126 items (64 + 62), flipping every ~1,002 game ticks and sending a synchronized observer pulse up into all four clock faces simultaneously.
  • Tape Rotation: When the input pulse arrives at a clock face, it triggers the first piston corner. Observers along the inside of the ring detect the block movement and fire the next three corner pistons in sequence, shifting the Block of Redstone clockwise by one lamp.
  • 6:00 Auto-Reset: The central Daylight Detector (set to moonlight mode) changes state at 6:00 AM and 6:00 PM. An observer watching its repeater checks whether the tape's Block of Redstone is currently at the 6 o'clock position. If you slept through the night or unloaded the chunks, the copper bulb latch toggles on and repeatedly cycles the piston tape until the Block of Redstone returns to 6 o'clock and turns the latch off.

Tips & variations

  • Always Use Waxed Copper: If you use copper slabs or bulbs in the piston tape and reset circuit, make sure they are waxed. Random oxidation changes block states and triggers observers, which will fire pistons out of order and jam the tape.
  • Calibrate Slightly Slow, Not Fast: Keep the hopper clock at 126 items (~1,002 game ticks). Running slightly slower than 1,000 ticks ensures the clock is just behind 6 o'clock at sunrise/sunset, allowing the auto-reset to snap it forward one step instead of looping all the way around 11 hours.
  • Java Edition Only: This mechanism relies on Java piston timings and sticky piston block-dropping behavior, so it will not function reliably on Bedrock Edition.
  • Check the Creator's Patch Note: The creator noted a minor timing bug with the reset under specific conditions and posted a community patch link in the video description if your reset ever fails to catch.

Frequently asked questions

What happens to the clock tower when I sleep in a bed?
When you sleep and wake up at 6:00 AM, the daylight detector changes state and sees that the redstone block is not at the 6 o'clock lamp. It automatically cycles the piston tape around until it reaches 6 o'clock and stops.
Why use slabs instead of full blocks inside the piston tape?
Slabs do not conduct redstone power, preventing stray signals from accidentally powering adjacent pistons or lamps inside the compact mechanism.
How many items go into the Etho hopper clock for accurate Minecraft time?
Put 126 items total (one stack of 64 plus 62) into the hopper clock. This creates a cycle of roughly 1,002 game ticks, matching the 1,000 game ticks per in-game hour.

Components used

More screen / pixel display