Infinite Ammo TNT Duper Cannon

This infinite ammo TNT cannon uses a coral fan and rail update mechanic to duplicate TNT entities, letting you fire endless barrages without crafting extra gunpowder. It is ideal for survival players who need a cheap, destructive siege weapon or perimeter clearing tool.

TNT & CannonsIntermediateJava Edition
Infinite Ammo TNT Duper Cannon video tutorial

Video: This Minecraft TNT Cannon has INFINITE TNT by ProfessorTNT

How to build it

  1. Build the Blast Chamber Walls

    Start on a 3x11 platform and surround it with two-block-high walls, adding a small roof over the backmost section. Leave the front end open for the fences.

  2. Install Fences and Open Fence Gates

    Place a row of 9 fences along the front edge of the chamber and extend the side walls to match. Place 9 floating fence gates directly above the fences and open every gate so they stop water while letting primed TNT pass.

  3. Flood the Blast Chamber

    Crouch-click water onto the fences (making sure not to waterlog them outside the chamber) so all water streams flow backward toward the rear wall. Close off the back wall once the water is flowing properly.

  4. Set Up the TNT Mover Pistons

    On a 3x4 area behind the chamber, build a small stepped frame and place a regular piston and a sticky piston with a solid block in front of it. Add two glass blocks adjacent to the piston structure to carry redstone upward.

  5. Angle the Update Rail

    Before wiring the mover, use a temporary block to slope a rail next to the mover assembly, then break the temporary block. Placing the rail early prevents surrounding redstone from breaking later.

  6. Wire the 6-Game-Tick Mover

    Run redstone dust up the glass blocks onto the top frame, place a solid block over the dust at the end, and attach two redstone torches to power the return mechanism. Whenever the line is pushed forward, this circuit automatically shoves it back in 6 game ticks.

  7. Add the Note Block BUD

    At the top of the mover where the redstone dust redirects, place a note block with a solid block next to it and run redstone dust on top. This completes the block update detector.

  8. Place the Coral Fan and Push Piston

    Attach a coral fan at the start of the chamber with a solid block directly above it (mandatory to stop TNT spraying backward). Run the redstone line along the side to a regular piston positioned at the far end of the TNT row.

  9. Load the 10 TNT and Protective Slabs

    Place a row of 10 TNT blocks between the coral fan and the far push piston. Cover the top of the cannon channel with slabs so primed TNT cannot bounce upward and blow up the circuitry.

  10. Add the Toggleable Observer Clock

    Behind the push piston, place a sticky piston with a solid block and a lever, facing an observer clock (two observers facing each other). Flip the lever to push the observer into position and begin firing infinite duplicated TNT.

  11. Optional: Attach a 7-Item Etho Timer

    To prevent occasional short-range TNT drops during firing pauses, replace the lever with a single-cycle Etho hopper clock (two hoppers facing each other, two comparators, two elevated blocks with redstone dust, a regular piston, a sticky piston with a redstone block, and a note block trigger) loaded with 7 items.

How it works

This cannon exploits Java Edition TNT duplication by combining three sub-circuits:

  • Initial Push & Coral Update: When the observer clock pulses the rear piston, it pushes the row of 10 TNT blocks by one block. One TNT moves adjacent to the coral fan and sloped rail while receiving a block update.
  • Block Update Detector (BUD) & 6-Tick Mover: Shifting the row redirects redstone dust at the rear, updating the note block and triggering the mover pistons. Within 6 game ticks, the sticky piston and regular piston push the entire row of 10 TNT blocks back to its starting position, duplicating primed TNT entities into the water stream below.
  • Blast Chamber Propulsion: The duplicated TNT gathers in the flowing water against the open fence gates. Early TNT charges propel the later charges forward out of the barrel. The mandatory block above the coral fan and the top slabs keep all blasts aligned forward.

Tips & variations

  • Never Skip the Shield Blocks: The solid block directly above the coral fan prevents primed TNT from flying backward onto the redstone wiring. The slabs on top prevent TNT from popping onto the roof of the cannon.
  • Prevent Close-Range Shots: Leaving the cannon running continuously on a lever eventually hits a timing pause that drops a TNT charge very close to the front of the barrel. Using the 7-item Etho hopper clock cuts off the barrage right before that pause occurs.
  • Build Up High & Unload Safely: Build the cannon elevated off the ground so lower trajectories do not hit nearby terrain, and always turn the clock off before leaving the area or unloading chunks.
  • Java Edition Only: TNT duping with coral fans and rails relies on update order mechanics unique to Minecraft Java Edition and will not work on Bedrock.

Frequently asked questions

Why does my TNT cannon blow itself up after a few seconds?
You are likely missing either the solid block directly above the coral fan or the row of slabs along the top of the chamber. Both are mandatory to keep primed TNT from bouncing onto the redstone.
How do I stop the cannon from shooting TNT too close to the front?
Replace the manual lever with the single-cycle Etho hopper clock containing 7 items and trigger it via the note block. This stops the firing cycle right before the short-range pause happens.
Does this infinite TNT cannon work on Bedrock Edition?
No. Coral fan and rail TNT duplication relies on Java Edition block update behavior and piston mechanics.

Components used

More tnt cannon