Long Range Sniper TNT Artillery Cannon

This massive Sniper TNT Artillery Cannon is a heavy-duty redstone contraption designed to bombard targets from hundreds—or even over a thousand—blocks away. By combining a large rear propellant chamber with delayed forward projectile dispensers and comparator clocks, it launches a concentrated volley of TNT well beyond normal render distance. It is ideal for faction warfare, PvP siege bases, or clearing huge stretches of terrain in creative mode.

TNT & CannonsIntermediateJava Edition
Long Range Sniper TNT Artillery Cannon video tutorial

Video: Sniper Rifle TNT Artillery Cannon! - Minecraft Tutorial by Cubey

How to build it

  1. Build the 13x24 Base Platform

    Construct a flat rectangular platform measuring 13 blocks wide and 24 blocks long. Building this platform high up in the air or on top of a mountain will significantly increase the cannon's firing range and allow shots to ricochet across the ground.

  2. Place the Firing Button

    Find the exact center block at the back edge of the platform and place a solid block one space forward from the back. Attach your button to the rear face of this block to act as the main trigger.

  3. Mark the Redstone Circuit Supports

    Using a secondary block color to keep your wiring organized, lay out the circuit paths on both sides of the center trigger block. Build a straight row of 10 blocks along both outer edges of the platform, add a 2-block row three blocks out from the center block on each side, and place 3 more support blocks near the front ends of the side rows.

  4. Construct the Cannon Body and Barrel

    Build the central frame of the cannon behind the trigger block and extend two parallel walls all the way to the front edge of the 24-block platform. This long central channel forms the main barrel that guides the TNT.

  5. Install the Rear Propellant Dispensers

    Place your first large group of dispensers inside the rear chamber walls of the cannon body, making sure every single dispenser faces inward toward the central water channel. Hold sneak (Shift) while placing dispensers on top of each other to stack them into vertical tiers.

  6. Install the Forward Projectile Dispensers

    Move toward the front section of the barrel and place two solid blocks on each side of the frame, then build the second set of stacked dispensers facing inward toward the center of the barrel. These forward dispensers will drop the payload TNT that gets launched by the rear blast.

  7. Set Up the Symmetrical Comparator Clocks

    On the circuit support blocks near the front of the side paths, place one Redstone Comparator on each side and right-click both to turn on their front torch (subtract mode). Wire Redstone Dust around them into a loop so both sides mirror each other identically.

  8. Add the 7-Repeater Delay Lines

    Along the two outer 10-block support rows, place a straight line of 7 Redstone Repeaters on each side pointing forward toward the comparators. Right-click every repeater along these side lines three times to set them all to a full 4-tick delay.

  9. Wire the Lower and Upper Dispenser Tiers

    Place Redstone Repeaters directly behind the lower rows of dispensers, pointing straight into them. Add an upper ledge of solid blocks behind the top tiers of dispensers, then run Redstone Dust and additional forward-facing repeaters across the top so every dispenser in both the rear and front banks receives power.

  10. Line the Barrel with Slabs and Water

    Inside the front section of the barrel channel, place a row of 13 bottom slabs along the floor. Go to the back of the interior chamber and place your water source block at the bottom so the water flows forward up to the slabs, preventing the propellant TNT from blowing up the cannon.

  11. Load Ammunition and Fire

    Fill every dispenser in both the rear propellant section and the front projectile section with at least one full stack of TNT. Double-check that all wiring is completely symmetrical, then press the button at the back to fire an artillery volley.

How it works

This artillery cannon achieves extreme distances (averaging around 500 blocks and reaching up to 1,194 blocks in testing) by pairing massive propellant compression with rapid-fire payload dispensing:

  • Initial Trigger & Propellant Ignition: Pressing the rear button sends an immediate redstone signal to the rear banks of dispensers. Using repeaters pointing directly into the dispenser blocks (and an upper wiring deck above them), both vertical tiers of the rear chamber dispense primed TNT into the water stream simultaneously.
  • Water Protection: The water flowing along the base of the chamber pushes the primed propellant TNT toward the center while completely nullifying block damage to the cannon walls.
  • 28-Tick Delay Line: At the same time, the button pulse travels down the two outer lines of 7 repeaters set to maximum delay (4 ticks each, creating a 28-tick delay). This ensures the payload TNT is not dispensed too early, giving it a much longer fuse while flying through the air.
  • Comparator Pulse Multiplier: When the delayed signal reaches the front, it enters the two subtract-mode redstone-comparator loops. These act as fast comparator clocks while the button pulse is active, rapidly pulsing the forward projectile dispensers to drop multiple payload TNT entities onto the 13-slab barrel floor right before the rear propellant detonates.
  • Launch & Ricochet: When the massive rear propellant charge explodes, the shockwave propels the freshly dispensed front TNT entities out of the 13-slab barrel at extreme velocity. Because the payload TNT still has most of its fuse remaining, it travels hundreds of blocks—and if fired from high elevation, can bounce off the ground before detonating.

Tips & variations

  • Check Symmetry Before Firing: A single missing redstone dust, backwards repeater, or un-clicked comparator on one side will cause uneven detonation and instantly blow up the front of your cannon.
  • Never Skip a Dispenser: Every dispenser must contain TNT before firing, and every repeater on the 7-repeater side lines must be set to a full 4-tick delay.
  • Elevate for Maximum Range: While the cannon works on flat ground, building the 13x24 platform high in the sky or on a mountain peak drastically increases average distance and causes incoming TNT to skip across terrain for wider craters.
  • Use Blast-Resistant Blocks for Testing: The tutorial uses colored wool to clearly distinguish the base, frame, and wiring, but building the frame out of obsidian or cobblestone in survival mode makes repairs much easier if you misconfigure a repeater.

Frequently asked questions

How far can this Sniper TNT Cannon shoot?
In a 20-shot test on a flat world, shots landed anywhere between 139 blocks and 1,194 blocks away, with an average distance of around 500 blocks and a frequent hotspot between 140 and 200 blocks.
Why did my cannon blow itself up when I pressed the button?
Self-destruction usually happens if you forget to place the water source at the back of the barrel, forget to set all 14 side repeaters (7 on each side) to a full 4-tick delay, or forget to switch both comparators into subtract mode (front torch lit).
How do I place dispensers on top of other dispensers?
Hold down your sneak key (Shift on PC) while right-clicking on an existing dispenser to place another block or dispenser directly against it without opening its inventory.

Components used

More tnt cannon