Automatic Block Feeder

An automatic block feeder drops blocks directly into your off-hand at the exact speed you place and mine them. This compact workstation lets you effortlessly convert stacks of concrete powder, strip logs, or process Silk Touch ores and gravel using Fortune tools. You can even add an optional AFK tool-replacer module so you never have to stop mining when a pickaxe or axe breaks.

Piston ContraptionsBeginnerJava Edition
Automatic Block Feeder video tutorial

Video: Auto Block Feeder - Concrete Maker, Log Stripper, Fortune Ore Miner - Minecraft AFK Ready by ScottoMotto

How to build it

  1. Set Up the Collection System

    Place a chest on the ground with a hopper feeding into it. On top of the hopper, place a rail and a hopper minecart to immediately catch mined drops, and put a stair block directly in front of it so you can still open the chest.

  2. Place the Obsidian Backstop

    Behind the hopper minecart, place a support block and put an obsidian block on top of it. This obsidian acts as the unbreakable target you will aim at while holding left-click and right-click.

  3. Install the Water Dispenser

    To the side of the mining spot (facing toward the space right in front of the obsidian), place a dispenser and put a water bucket inside. Behind the water stream path, place an inward-facing stair and a sign or solid blocks around the sides to keep the water contained.

  4. Add the Water Toggle Button

    Place a solid block above the obsidian and attach a button next to the water dispenser. Pressing this button will waterlog the stair and deploy or retract the water stream whenever you want to convert concrete powder.

  5. Mount the Observer and Block Dispenser

    Directly above the spot where blocks will be placed (in front of the obsidian), place an observer facing downward so its face looks down at the mining space. Next to the observer, looking down toward where the player stands, place a second dispenser facing downward.

  6. Wire the Top Redstone Roof

    On top of the observer, place a piece of redstone dust. Run that dust into a redstone repeater pointing toward the downward-facing block dispenser, and place another piece of redstone dust on top of the dispenser (or adjacent solid block) to trigger it.

  7. Configure the Repeater & Load Blocks

    Set the repeater to 1 tick for concrete and ore mining, or 2 ticks for stripping logs. Put a buffer of 5 to 6 blocks into your off-hand, load the rest of your stacks into the overhead dispenser, and hold both left-click and right-click against the obsidian.

  8. Optional: Add an AFK Tool Replacer

    For long AFK sessions, place a dropper facing the player with a pressure plate on top of it and a glass enclosure around it. Have an observer watch the pressure plate and send a signal through a 4-tick repeater back into the dropper; when a floating tool is picked up to replace a broken one, the plate depresses and dispenses the next tool.

How it works

The circuit creates a self-sustaining feedback loop synchronized to your exact mining speed:

  • Block Placement Detection: When you hold right-click and left-click while aiming at the Obsidian, you place a block from your off-hand into the empty space below the Observer.
  • Signal Delay: The downward-facing observer detects the state change and outputs a 1-tick redstone pulse out of its top into the Redstone Dust and Redstone Repeater.
  • Item Replenishment: The repeater delays the pulse slightly (1 tick for standard breaking, 2 ticks when an extra right-click action like stripping logs is required) and powers the overhead Dispenser, dropping one new block directly onto the player to keep the off-hand buffer constant at 5–6 items.
  • Collection: As your tool breaks the placed block, the drop is immediately pulled in by the Hopper Minecart below and transferred into your storage chest.

Tips & variations

  • Keep an Off-Hand Buffer: Always start with 5 to 6 blocks in your off-hand before mining. With Efficiency V tools, mining speed is so fast that a 1-item stack can occasionally run out before the dropped item falls into your inventory.
  • Log Stripping Sync: Always switch the top repeater to 2 ticks when stripping wood or logs. If you use an Efficiency V axe, the very first log may break before getting stripped, after which the machine will stay perfectly in sync for the rest of the stack. With lower-efficiency axes, manually right-click to strip the first log before holding down both mouse buttons.
  • AFK Tool Feeder Setup: If you build the optional tool dispenser, fill every empty slot in your inventory with a placeholder item (like 35 single dirt blocks) leaving only your active tool slot open. Because items take 5 minutes to despawn and a stone pickaxe breaks in roughly 4 minutes and 15 seconds, the pre-dispensed backup tool sitting on the pressure plate will never despawn before your current tool breaks.
  • Expand Block Storage: For multi-stack AFK concrete sessions, attach a hopper and double chest feeding into the top block dispenser.

Frequently asked questions

Why does my off-hand run out of blocks while mining?
You need a buffer of 5 to 6 blocks in your off-hand before you start holding left and right click, especially when using Efficiency V tools. Also check that your top repeater is set to 1 tick for concrete/ores and 2 ticks for logs.
Can I use lower efficiency or stone tools with this feeder?
Yes! Because the observer only dispenses a new block when you place or break one, the feeder automatically adapts to any tool tier or Enchantment level.
What blocks can I process in an automatic block feeder?
You can harden any color of concrete powder (with the water turned on), strip any type of log or wood with an axe, mine Silk-Touched ores like diamond or quartz with a Fortune III pickaxe, or convert gravel into flint.

Components used

More block feeder