
Video: Minecraft Tutorial: Anti-Hoarding Device/Overflow Item Destroyer by impulseSV
How to build it
- Place the Storage Chest and Hopper
Place the storage chest where you want to keep your items. Attach a hopper to the back of this chest so that it feeds directly into it.
- Position the Downward Dropper
Use temporary blocks behind the storage hopper to place an upside-down dropper facing straight down, one block away from the first hopper. Remove the temporary blocks once the dropper is in place.
- Connect the Overflow Hopper
Place a second hopper directly above the first storage hopper, facing horizontally into the side of the downward-facing dropper.
- Install the Comparator
Go to the back of the dropper and place a redstone comparator reading from it, pointing away into a solid building block.
- Wire the Auto-Dropper Loop
Place a 2x2 square of redstone dust to the side of the comparator and the solid block it faces, then place one more piece of redstone dust on top of that solid block.
- Cut Off the Redstone Line
Place solid blocks above the outer dust of the 2x2 loop to cut the redstone connections so the dust forms a tight circular loop without interfering with adjacent lines.
- Add the Update Rail
Crouch and place an activator rail or a powered rail directly on top of the dropper.
- Connect the Farm Input Line
Run your input hopper pipeline (or an input chest on a hopper) into the top overflow hopper that leads toward the dropper.
- Add Lava or Cactus Disposal
Dig out the space directly beneath the downward-facing dropper, surround it with non-flammable blocks, and place a lava source block (or a cactus on sand) to destroy the ejected items.
How it works
This circuit relies on vanilla hopper priority combined with a self-resetting comparator clock:
- Normal Storage Mode: When items enter the top hopper (which points sideways into the dropper), the bottom hopper directly underneath it pulls the items downward first because vertical pulling occurs before horizontal pushing if the bottom hopper has room.
- Overflow Detection: Once the storage chest and the bottom hopper are 100% full, the bottom hopper can no longer pull items down. The top hopper is then forced to push excess items sideways into the dropper.
- Auto-Fire Clock: As soon as an item enters the dropper, the
redstone comparatordetects it and powers the solid block in front of it. The 2x2 redstone dust loop carries this signal back into the side of the comparator (or around the block) while powering the dust on top of the block and theactivator railon top of the dropper. - Block Update & Ejection: The rail updates and powers the dropper through quasi-connectivity/adjacent powering, shooting the item downward into the lava or cactus. When the dropper empties, the comparator turns off, resetting the loop for the next item.
Tips & variations
- Lava vs. Cactus: Either disposal method works below the dropper. If you use lava, make sure no flammable wood or wool blocks are nearby. If you use a cactus, remember it requires sand beneath it and empty air spaces on all four horizontal sides.
- Rail Choice: Both activator rails and powered rails work identically on top of the dropper; use whichever is cheaper for your survival world (activator rails use iron and redstone torches, whereas powered rails require gold).
- Hopper Locking Caution: The cut-off blocks around the redstone loop are important so the redstone dust does not accidentally redirect into the input hoppers and lock them while firing.





