Rotating Super Smelter

Traditional super smelters require massive amounts of iron for hoppers and rails, but this rotating furnace array for Minecraft Bedrock uses piston feed tapes to rotate 27 (or 54) furnaces past a single fueling and loading station. It requires only four hoppers in total, distributes items evenly, and achieves 100% fuel efficiency with bamboo slabs, coal, or blaze rods. It is the ideal lag-friendly, budget smelter for mid-to-late game survival bases.

Item CircuitsIntermediateBedrock Edition
Rotating Super Smelter video tutorial

Video: Minecraft Bedrock: Fast SUPER SMELTER Tutorial! Simple, Cheap & Efficient! MCPE Xbox PC Ps5 by silentwisperer

How to build it

  1. Build the Main Clock and Bottom-Right Piston

    On the bottom right of your 17-wide build area, place two solid blocks with a redstone torch, dust, and a forward-facing piston. Create a two-way repeater loop behind it using three repeaters going into a block on the bottom and three repeaters on upper slabs above them going the opposite direction to form a repeater clock.

  2. Install the Master On/Off Switch

    Place a redstone lamp next to the clock with a lever on the front and a redstone torch on the back. Flicking this lever toggles the repeater clock on and off.

  3. Set Up the Top-Right Downward Piston

    A couple of blocks above the clock's redstone dust, place an observer facing downwards into a solid block and redstone dust. Attach a downward-facing regular piston next to it to push the top row of furnaces down.

  4. Place the Bottom-Left Upward Piston

    From the first furnace position in front of your bottom-right piston, count 11 blocks to the left and place an upward-facing piston on the 12th block. Power it via a solid block using a lever, redstone dust, and a repeater facing into the block so any furnace pushed there is immediately sent upwards.

  5. Load the 27-Furnace Loop

    Fill in the rectangular track with 27 furnaces between your pistons. Leave three of the corners empty so the pistons have room to push the rows into a continuous loop.

  6. Wire the Top-Left Forward Piston

    At the top-left corner, place two slabs with an activated lever and redstone dust running into a block with a repeater. Place a redstone torch behind that block and a 2-tick repeater above it to power the top-left piston that pushes furnaces across the top row.

  7. Attach Input and Output Chests

    Above the first furnace position on the top-left, place a hopper pointing down with a double chest above it for smeltable items, and a hopper behind the furnace connected to a double chest for fuel. Place an optional early-output double chest with a hopper a few blocks over, and dig out the bottom floor to place your main output double chest with a hopper underneath the bottom furnace row.

  8. Build the Top Item-Distribution Line

    Behind the top-left corner, build a vertical redstone torch tower (block, torch, block, torch) leading to a line of five upper slabs across the top back. Place three 4-tick repeaters along these slabs leading toward the input hoppers to control how long the hoppers unlock per cycle.

  9. Add the Smart Empty-Chest Detection

    Take a comparator output from the smeltable items chest into a block with redstone dust. Have this power a downward-facing sticky piston holding a redstone block; when the input chest runs out of items, the redstone block retracts and powers a 1-tick repeater that locks the hoppers so you don't waste fuel. Add a redstone lamp indicator next to the chest.

  10. Configure the Fuel Hopper Lock

    If using coal or blaze rods, place a redstone torch, slab, and repeater locking the fuel hopper so each furnace only receives 1 fuel item. If using bamboo slabs, expand this side circuit with three 4-tick repeaters so the hopper stays unlocked long enough to feed 4 bamboo slabs (enough for 6 items) into each furnace.

  11. Adjust Repeater Timings for Your Fuel

    Set the three rows of timing repeaters based on your chosen fuel. For bamboo slabs: set the top row to 1-4-4-4 ticks, middle row to 1-2-2, and bottom row to 2-2-2. For coal: set top to 4-4-4-4, middle to 2-2-2, and bottom to 3-3-3. For blaze rods: set top to 3-4-4-4-4, middle to 3-4-4, and bottom to 4-4-4.

  12. Prime the Fuel Hopper and Add Flush Controls

    Before running the smelter, manually place at least one piece of fuel inside the fuel hopper to prime it, and place a button on the top-right piston to cycle any stuck corner furnace before startup. You can also place an optional override lever near the input hopper lock to rotate and empty all furnaces without feeding new items.

How it works

This circuit replaces long hopper lines with a piston feed tape crafted out of 27 movable furnaces (possible in Bedrock Edition because tile entities can be pushed by pistons).

  • Clock & Rotation: When the main lever on the redstone lamp is flipped, the bottom-right repeater clock cycles at a steady interval matched to your fuel source. Each pulse pushes the bottom row of furnaces left, which triggers the corner circuits to push the left column up, the top row right, and the right column down.
  • Metered Loading: As a furnace pauses at the top-left loading station, the torch tower temporarily unlocks the item and fuel hoppers for a precise number of redstone ticks. For example, on the bamboo setting, it lets exactly 6 smeltable items and 4 bamboo slabs enter before locking again.
  • 100% Fuel Efficiency: As the furnace rotates around the loop, it smelts its items in transit. The first smelted item can be pulled out early at the top output chest, while the remaining smelted items are extracted by the bottom hopper into the main storage chest just before the furnace returns to the start.
  • Smart Shutoff: A comparator monitors the raw item input chest. If it empties, the sticky piston retracts its redstone block, locking the fuel system so furnaces stop consuming fuel while empty.

Tips & variations

  • Bedrock Exclusive: This design relies on pistons being able to push furnaces (movable tile entities), which is a built-in feature of Minecraft Bedrock Edition and will not work in vanilla Java Edition.
  • Best Fuel Choice: Bamboo slabs (or planks) crafted via an auto-crafter are highly recommended over lava or coal blocks; oversized fuel sources burn longer than a single rotation and reduce fuel efficiency.
  • 54-Furnace Upgrade: You can double the speed for zero extra timing redstone by removing the smart comparator shutoff and adding a second parallel ring of 27 furnaces right in front of the first, expanding the depth from 2 blocks to 4 blocks.
  • Startup Fix: If the system stops with a furnace resting in the top-right corner, press the manual button to push it down before turning the main clock lever on, otherwise the first furnace will receive items without fuel.

Frequently asked questions

Why does this super smelter only work on Minecraft Bedrock Edition?
In Minecraft Bedrock, pistons can push tile entities like furnaces while they are actively smelting. In Java Edition, furnaces cannot be moved by pistons.
What are the best fuels to use in this rotating super smelter?
The timing circuits are specifically calibrated for bamboo slabs (6 items per 4 slabs), coal/charcoal (8 items per coal), and blaze rods (12 items per rod) for 100% fuel efficiency.
How do I empty the furnaces without adding more items?
Flip the manual override lever on the upper hopper lock to keep the input hoppers locked, then turn on the main rotation lever until all furnaces have passed over the bottom output hopper.
Can I expand this smelter to hold more furnaces?
Yes, you can upgrade the 27-furnace loop to a 54-furnace double loop by adding a second layer of furnaces, hoppers, and corner pistons to the front, increasing the thickness from 2 blocks to 4 blocks.

Components used

More auto smelter