
Video: The Best Automatic SUPER SMELTER in Minecraft! (TUTORIAL) by Cinder D2
How to build it
- Build the Output Hopper Line
Dig a 2-block hole for your double output chest and connect a hopper into the back of it. Extend a line of 10 additional hoppers feeding into that first hopper to collect all smelted items.
- Place Furnaces and Input Hoppers
Place 10 furnaces on top of the 10 hopper line. Attach a row of 10 hoppers into the back of the furnaces for fuel, and another row of 10 hoppers on top of the furnaces for the items to be smelted.
- Lay the Minecart Rails
Place temporary helper blocks at both ends of the top and back hopper lines so the tracks extend past the hoppers. Run two parallel lines of regular rails across the top hoppers and back hoppers, placing powered rails at both ends so the two tracks do not connect to each other.
- Add Stops, Levers, and Chest Minecarts
Replace the very last powered rail on both ends of each track with a solid block to stop the carts. Place a lever underneath the end blocks to power the remaining powered rails (leave the starting end off until loaded, and turn the far end on), then place a Minecart with Chest on each track.
- Install the Dried Kelp Auto-Crafter
Point a hopper into the lower fuel Minecart with Chest, and place a Crafter behind that hopper facing into it. Build a small 4x2 platform behind this Crafter to support the comparator signal-strength reader.
- Wire the Crafter Signal Comparison
Place a comparator reading out of the back of the first Crafter, and a second comparator right next to it reading from a second reference Crafter that has all 9 slots toggled off. Run the first comparator into a solid block, place redstone dust next to that block, and run a repeater from the dust into a block beside the active Crafter so it fires only when all 9 slots are filled.
- Attach the Kelp Smoker
Place a hopper on top of the active Crafter pointing down, and set a Smoker directly on top of that hopper. This Smoker will cook raw kelp into dried kelp and drop it straight into the Crafter.
- Build the Kelp Collection Line
Place a hopper on top of the Smoker and extend a line of 7 more hoppers out from it. Behind those 7 hoppers, leave a 1-block gap and place a row of 7 dirt blocks for planting kelp, then enclose the base and build up glass front and side walls.
- Add Kelp Pistons, Observers, and Water
Above the dirt row, place a row of solid blocks, then a row of 7 pistons facing forward over the kelp space, and a row of 7 observers on top facing the kelp with their output arrows pointing back. Place solid blocks behind the pistons with redstone dust on top so the observers trigger the pistons, fill the top observer level with water, plant kelp on the dirt, and roof the chamber.
- Build the Bamboo Fuel Line
Attach a hopper into the back of the Smoker and extend a line of 11 more hoppers in a straight line to feed it fuel. Place 11 mud blocks directly on top of the 11 farm hoppers and surround the base with building blocks and a front glass wall.
- Add Bamboo Pistons and Observers
Build the back wall up two blocks above the mud, then place a row of 11 pistons facing forward and 11 observers on top watching the bamboo growth height. Place solid blocks behind the pistons with redstone dust on top, plant bamboo on the mud blocks, and completely enclose the chamber.
How it works
This system connects two self-harvesting crop farms to an automated 1.21 crafting setup that continuously fuels a 10-furnace array:
- Bamboo & Kelp Harvesting: When any bamboo stalk or kelp plant grows up to the height of its
Observer, the observer emits a 1-tick redstone pulse into the dust line behind it. This powers thePistonbelow, breaking the crop while leaving the base plant intact. - Crop Collection: Broken kelp floats to the top of the water column and funnels into the 7-hopper line feeding the top of the
Smoker. Broken bamboo is pulled straight through the partial-heightMudblocks by the 11 hoppers underneath and routed into the back of the Smoker as fuel. - 9-Slot Crafter Logic: As the Smoker cooks dried kelp, it drops into the main
Crafter. A second reference Crafter has all 9 of its slots disabled, outputting a constant signal strength of 9 through itsRedstone Comparator. Once the main Crafter has at least one dried kelp in all 9 slots, its comparator also outputs strength 9, travels through theRedstone Repeater, and pulses the Crafter to craft a Dried Kelp Block directly into the fuelMinecart with Chest. - Even Distribution: Two Chest Minecarts travel back and forth along the top and rear hopper lines, splitting raw items and dried kelp blocks evenly across all 10 furnaces.
Tips & variations
- Keep the 7:11 Ratio: The tutorial uses 7 kelp plants to 11 bamboo plants. This guarantees the bamboo farm produces enough fuel to cook all incoming kelp without the Smoker running dry. If you extend the farm, maintain at least this ratio (or add extra bamboo).
- Use Mud for Bamboo: Mud is slightly shorter than a full block, allowing regular hoppers underneath to pull dropped bamboo items directly through the block without needing a hopper minecart.
- Prevent Rail Merging: When placing the two parallel powered rail lines on top and behind the furnaces, place them carefully or use temporary rails so the tracks do not curve into one another.





