
Video: 3 Item Elevators - Minecraft Tutorial 1.21+ by Klausmond
How to build it
- Design 1: Base & Glass Tube (Bubble Elevator)
Place one Soul Sand block on the ground (do not use Soul Soil) and face a dropper directly into one side of it. Build a 10-block-tall glass tube surrounding the column directly above the Soul Sand, leaving the space above the Soul Sand hollow.
- Design 1: Auto-Dropper Clock & Input
Behind the dropper, place a comparator facing away from it, leading into a repeater. Loop redstone dust from the repeater output back into the side of the comparator and into a solid block next to the dropper with dust on top. Crouch and attach a hopper feeding into the front of the dropper with an input chest on top.
- Design 1: Water Column & Top Collection
At the top of the glass tube, break one front glass block and place a hopper leading into an output chest, then cap the tube walls so items cannot splash out. Fill the tube from the top with water, plant kelp from the Soul Sand all the way to the top to turn every block into a water source, then break the bottom kelp to start the bubble column.
- Design 2: Dropper Stack & Observer Spine
For a waterless elevator, stack 10 droppers facing straight up, with a chest on top of the final dropper and an input hopper+chest at the bottom front. Leave a one-block gap behind the bottom dropper, place an observer facing the droppers, and stack a column of downward-facing observers above it to the top.
- Design 2: Secondary Observers & Base Clock
Place a second column of observers in the gap between the droppers and the first observer column, facing directly into the droppers so their red output dots touch the droppers. At the bottom, wire a comparator reading the bottom dropper into a repeater and a loop of redstone dust that feeds back into the comparator and the bottom observer chain.
- Design 3: Silent Dropper Stack & Hopper Clock
Stack 10 upward-facing droppers with a front input hopper and chest. Place a comparator reading the bottom dropper into a solid block with a redstone torch on the side, then place two hoppers facing directly into each other next to it with a single dummy item inside and a second comparator reading one of the hoppers.
- Design 3: Alternating Torch Tower
Build a checkerboard pattern of solid blocks up the back of the dropper tower by placing blocks in two vertical columns and breaking every other block in an alternating staggered pattern. Place redstone torches on both the inside and outside faces of this staggered tower all the way up.
- Design 3: Cap with Output Chest
Place an output chest directly on top of the highest dropper. Once the top dropper ejects directly into a container rather than the open air, the entire elevator operates completely silently.
How it works
All three elevators rely on comparator item detection at the base to only run when items are present:
- Auto-Dropper Comparator Clock (Designs 1 & 2): When an item enters the bottom dropper, the comparator outputs a signal through a repeater. That boosted signal loops back into the side of the comparator (turning it off briefly in subtraction/loop mode) while simultaneously powering the dropper, creating a rapid pulse until the dropper is empty.
- Bubble Column Transport (Design 1): The dropper shoots items directly into the Soul Sand block, where they glitch slightly into the water column above and are propelled upward by the bubble stream into the top collection hopper.
- Observer Chain (Design 2): The bottom clock pulses the lowest observer, which sends a 1-tick pulse up the vertical observer column. The inner column of observers detects each state change and fires every dropper in sequence from bottom to top.
- Silent Hopper-Torch Ladder (Design 3): When items enter the bottom dropper, the comparator unlocks the two-hopper etho-style clock. As the single item bounces back and forth between the two hoppers, the second comparator toggles the staggered redstone torch tower on and off, shifting items smoothly up the dropper column into the top chest without firing empty droppers (which eliminates the clicking sound).
Tips & variations
- Soul Sand vs. Soul Soil: Only Soul Sand creates upward bubble columns in water. Also remember that every single water block in the tube must be a full source block—using kelp is the fastest way to convert flowing water into source blocks.
- Java vs. Bedrock Edition: According to the creator, the Bubble Elevator (Design 1) works in both Java and Bedrock Edition, while the two Dropper Elevators (Designs 2 & 3) rely on Java-specific redstone/quasi-connectivity behavior and are for Java Edition only.
- Why is Design 3 still clicking? A silent dropper elevator only becomes completely silent once you place a chest (or hopper) on top of the final dropper. Ejecting items into air always produces a dispenser click sound.




