
Video: Multi-Item Slot Sorter Expandable | Minecraft Bedrock Redstone Tutorial | MCPE XBOX PS by OmLedu
How to build it
- Build the Chest Wall
Place your columns of double chests to form the front storage wall, leaving 4 blocks of space on the left for the input and 5 blocks behind the chests for redstone. You can make the wall as tall as you like, provided every vertical column has an odd number of chests.
- Place Hoppers and Dropper Elevators
Behind the storage wall, crouch and place a column of hoppers pointing into the right backside of every chest. In the gaps between the hopper columns (except after the final output column), build columns of droppers facing straight up, starting one block below the lowest hopper and ending flush with the top chests.
- Link the Columns Top and Bottom
At the bottom of each hopper column, place one hopper pointing sideways into the bottom dropper of the adjacent column. At the very top of the wall, place double chests spanning across the top of a dropper column and the next hopper column to bridge the items over.
- Wire the Locking Torches and Dropper Lines
Leave a 1-block gap behind the hoppers and build horizontal rows of solid blocks at the bottom level and every other block going up. Place redstone torches on the back face of these blocks aligned with every hopper column, place glass blocks in the spaces between torches so they touch the droppers, and run redstone dust across the top of the solid blocks and glass.
- Wrap Around Corners (Optional)
To turn a corner, attach hoppers to the left backside of the new wall's chests and shift the upward dropper columns to include an extra column on the rightmost side. Connect the corner at the bottom with a short hopper line leading into the first dropper column, place solid blocks above the corner hoppers next to the glass, and continue the alternating torch and dust rows.
- Install the Input Chest and Feed Line
For a low input, place your input chest on the left side one block off the floor with a hopper feeding a bottom dropper, then build an upward dropper tower topped with a double chest bridging into the first storage hopper column. For a high input, place the input chest one block above the top-left storage chest feeding a short dropper pair that bridges directly into the top of the first column.
- Build the Simple Input Clock
Place a comparator reading the first input dropper facing into a 7-block platform. Set a second comparator in subtraction mode feeding a 4-tick repeater, loop a 1-tick repeater back into the side of the subtraction comparator with 4 redstone dust, and place a redstone torch on the end block (add a lever to the dust if you want a manual flush toggle).
- Build the Automated Copper Bulb Input (Optional)
To automatically flush every item without leaving leftovers in the droppers, attach a copper bulb, observer, and dual piston-redstone block latch to the input comparator along with two hoppers facing into each other. Load the timer hoppers with roughly 4 filler items per storage chest in your wall so the clock stays active just long enough for the last item to reach the overflow chest.
- Connect and Boost the Clock Signal
Connect the output redstone torch from your input clock to the horizontal redstone dust lines behind the storage wall. For larger walls, place repeaters pointing into the solid block rows within 15 blocks of the far ends and link them vertically using a glass-and-dust tower so every row pulses in sync.
- Fill Every Chest Slot to Program the Filter
Open every storage chest and place at least one of the desired item into every single slot, ensuring no empty slots remain in filtered chests. Leave the very last column of chests empty to catch unsorted items and overflow.
How it works
This circuit relies on sequential hopper locking and vertical dropper elevators to snake items through every chest in the array:
- Hopper Locking Grid: The horizontal rows of redstone dust and redstone torches alternate vertically behind the hoppers. When the system is idle, half the hoppers are locked directly by the redstone dust lines and the other half are locked by the redstone torches, preventing items from slipping out of order.
- Clock Cycling: When items enter the input dropper, the comparator detects them and activates the subtraction comparator clock. As the clock pulses the main redstone lines on and off, the solid blocks invert the attached redstone torches while simultaneously firing the glass-adjacent droppers.
- Snaking Path: Each pulse unlocks one set of hoppers while locking the next, stepping items down the hopper column one chest at a time. At the each chest, the hopper checks if the item matches any stack inside; if a matching incomplete stack exists, the item enters the chest, otherwise it drops to the next hopper below.
- Dropper Elevators: Items that reach the bottom of a column without finding a matching slot are pushed into the bottom of the adjacent dropper tower, shot to the top bridging double chest, and fed down the next column of hoppers.
- Auto-Flush Timer: In the automated copper bulb variant, the initial item toggles a copper bulb and shifts a redstone block between two pistons to start a dual-hopper timer. The clock continues cycling until the hopper timer finishes counting its items (about 4 items per chest), guaranteeing that the very last item makes it all the way to the final overflow chest.
Tips & variations
- Never Leave Empty Slots: Every single slot in a sorting chest must contain at least 1 item at all times. If a slot empties out, random items passing by will immediately fill that empty slot. Use filler items or spread duplicate stacks across unused slots.
- Odd Number of Chests Only: Always stack an odd number of chests per vertical column so the alternating torch-and-dust pattern aligns properly at the top and bottom of each column.
- 14-Chest Width Limit: If you build a flat wall wider than 14 double chests, add a 1-block spacer column or wrap around a corner after the 14th column, and split the redstone lines into separate repeater-powered sections so signal strength never runs out.
- Tuning the Hopper Timer: Test your finished sorter by dropping a single unsorted item into the input. If it stops before reaching the final overflow chest, add a few more items to the timer hoppers; if the droppers keep ticking long after it arrives, remove a few items.





