Fast 4x4 Piston Door

A 4x4 piston door makes an impressive, grand entrance for large survival bases, vaults, or underground bunkers. This Bedrock-exclusive design uses slime and honey block double piston extenders to open and close as fast as possible while remaining compact, reliable, and completely spam-proof.

Piston DoorsIntermediateBedrock Edition
Fast 4x4 Piston Door video tutorial

Video: Minecraft Bedrock: The BEST 4x4 Piston Door Tutorial! [1.17+] [Easy] by CraftyMasterman

How to build it

  1. Clear the Build Area and Frame

    Clear out a space that is 3 blocks deep, 12 blocks wide, and 9 blocks tall. Build your 4x4 doorway frame two blocks above the ground, making the frame 3 blocks deep.

  2. Place the Top and Bottom Pistons

    Along the bottom of the doorway frame, place two rows of six upward-facing sticky pistons. Mirror this on top of the frame with two rows of six downward-facing sticky pistons.

  3. Insert Slime and Honey Blocks

    Break the middle blocks in the frame walls and place a pair of slime blocks and a pair of honey blocks into the gap. Repeat this on the opposite side, but alternate the slime and honey positions so like-blocks do not stick to each other across the door.

  4. Set Up the Side Pistons

    On the outside of the frame, arrange your door blocks in an L-pattern on both sides. Place four inward-facing sticky pistons on each side facing those blocks, then attach eight more door blocks directly onto the slime and honey blocks.

  5. Create the Main Input Line

    Run a line of redstone dust underneath your bottom sticky pistons. Replace the two center pieces of dust with two 1-tick repeaters pointing to the right, and place two blocks in front of the ends of this redstone line on both sides with outward-facing repeaters (keep the right repeater on 1 tick and set the left repeater to 3 ticks).

  6. Wire the Lower Double Extender

    In front of the 3-tick repeater, build a C-shape out of solid blocks and top it with two redstone dust and a 2-tick repeater facing toward the back. Add three more blocks with redstone dust on top, and place two redstone torches to hold the lower side sticky pistons extended. From the C-shape, run a 2-tick repeater into a block with redstone dust in front of it to power the bottom pistons.

  7. Build the Slab and Jukebox Ladder

    On the outside edge, create an upward signal tower alternating a top slab, a jukebox, a top slab, a jukebox, and two more top slabs. Place redstone dust on top of every slab and jukebox in this ladder.

  8. Wire the Upper Side and Top Pistons

    At the top of the ladder, place an obsidian block with redstone dust on it, leading into a block with two redstone torches that power the upper side pistons. Place a second obsidian block with a 2-tick repeater running into a block with dust in front of it for the top pistons.

  9. Connect the Back Circuit

    Move to the back corner near the top and place a third piece of obsidian with redstone dust on it. Place a block up with a redstone torch on its side, and another block below with redstone dust to power the remaining upper pistons. Test the main line to verify this half of the door opens and closes smoothly.

  10. Mirror the Circuit on the Other Side

    Repeat Steps 5 through 9 on the opposite side of the door, wiring the bottom pistons, building the slab-and-jukebox ladder, and connecting the top obsidian circuit. Once finished, cover the exposed wiring with walls and run your lever or input into the bottom redstone line.

How it works

This 4x4 door relies on a synchronized three-step movement sequence on both the left and right halves:

  • Step 1 (Clearance & Fold): When the bottom input line changes state, the 1-tick and 3-tick repeaters sequence the side storage pistons. Powered by redstone torches, these side pistons retract first to pull the side door blocks out of the way of the slime and honey extenders.
  • Step 2 (First Extension): The 2-tick repeaters fire the back row of the bottom and top sticky pistons, pushing the slime and honey columns one block toward the center along with the front sticky pistons.
  • Step 3 (Final Push): The signal travels up the transparent slab-and-jukebox ladder (jukeboxes act as immovable full blocks that can hold redstone dust without sticking to slime or honey) and reaches the obsidian blocks at the top. This powers the extended front sticky pistons, pushing the center 2x2 door blocks into place.

On opening, the 3-tick delay ensures the center blocks are pulled back by the slime and honey columns before the side pistons extend to fill the frame flush.

Tips & variations

  • Why Jukeboxes and Obsidian? Slime and honey blocks grab adjacent blocks when moving. Obsidian and jukeboxes are immovable blocks in Bedrock Edition, preventing the flying segments from jamming the redstone wiring.
  • Alternate Slime and Honey: Make sure your slime blocks touch honey blocks across the center seam and not other slime blocks, or the two halves of the door will stick together and break.
  • Bedrock Exclusive: This design relies on Bedrock Edition's piston timings, redstone torch behavior, and the ability to place redstone dust on jukeboxes while keeping them immovable. It will not work in Java Edition.

Frequently asked questions

Does this 4x4 piston door work on Minecraft Java Edition?
No. This circuit is specifically engineered for Minecraft Bedrock Edition and uses Bedrock-specific repeater timings, piston mechanics, and movable block rules.
Why does the tutorial use jukeboxes in the redstone ladder?
In Bedrock Edition, jukeboxes are immovable by slime and honey blocks while still allowing redstone dust to be placed on top of them, letting the vertical slab ladder pass directly next to moving slime and honey blocks without sticking.
Can I spam the lever without breaking the door?
Yes, because the door only uses solid state torch inversions and direct repeater delays rather than sensitive observer monostable pulses, it is spam-proof.

Components used

More 4x4 door