Beacon Laser Light Show

A beacon laser light show uses redstone to dynamically push stained glass blocks into beacon beams, creating a shifting wave of colors across the sky. It is a fantastic decorative project for party areas, minigame lobbies, or adding life to a large survival base. This tutorial covers two survival-friendly redstone designs—one using a minecart track and another using arrow dispensers and target blocks—plus a creative mode command block setup.

Displays & LightingIntermediateJava Edition
Beacon Laser Light Show video tutorial

Video: Minecraft Redstone Light Show With Beacons! by bLOckOus

How to build it

  1. Build the Beacon Base

    Construct a long 3-wide base of iron or gold blocks and place a line of beacons down the center so every beacon beam activates.

  2. Lay the Detector Rail Track (Design 1)

    Run a line of glass or transparent blocks above the beacons and lay a rail track on top. Place a detector rail directly over each individual beacon and powered rails in between to keep a minecart moving back and forth.

  3. Connect Sticky Pistons and Stained Glass

    Next to each detector rail, wire a sticky piston holding a stained glass block aimed directly at the beacon beam. When the minecart rolls over a detector rail, the piston will push the stained glass into the beam.

  4. Add Vertical Observer Tiers (Optional)

    To mix multiple colors per beam, run a vertical line of observers and additional sticky pistons with different stained glass colors above the first row, then place a minecart on the track to start the show.

  5. Set Up Targets and Dispensers (Design 2)

    For an arrow-triggered wave, arrange alternating target blocks and dispensers filled with arrows along your line of beacons. Run redstone dust along the outer edge to connect each target block output to the next dispenser and a sticky piston holding stained glass.

  6. Build the Repeater Return Loop

    Connect the end of the target block line back to the starting dispenser using a long chain of redstone repeaters. Set enough delay on the repeaters so the color wave finishes reaching the end of the beacons before the loop restarts from the beginning.

  7. Use Command Blocks for Creative Shows (Design 3)

    If you are in Creative mode, place chains of command blocks linked with repeaters next to each beacon. Use the /fill command with relative coordinates to swap different stained glass blocks directly inside the beacon beams across multiple vertical tiers.

How it works

All three light show designs rely on the mechanic that placing a stained glass block into an active beacon beam changes the beam's color, and stacking multiple colors blends them together:

  • Design 1 (Minecart Loop): As the minecart travels along the track, it activates each detector-rail in sequence. Each detector rail powers an adjacent sticky-piston, pushing a stained glass block into the beam for a brief moment. If you attach an observer line going upward, that single pulse ripples up to trigger upper rows of pistons as well. When the cart hits the end block, it bounces back, reversing the light show direction.
  • Design 2 (Target & Dispenser Chain): Pressing the start button fires the first dispenser into a target block. When hit by an arrow, the target block emits a redstone signal that simultaneously pushes a stained glass piston and fires the next dispenser down the line. A long delay line of redstone-repeater blocks loops the final signal back to the first dispenser so the wave always moves in one direction.
  • Design 3 (Command Block Loop): Instead of moving blocks with pistons, a repeater clock triggers command blocks running /fill X Y Z X Y Z block_name using relative coordinates to instantaneously replace the stained glass blocks above each beacon.

Tips & variations

  • Disable Heavy Shaders: Some shader packs struggle to update beacon beam colors rapidly. If the beams appear frozen or do not change color when glass moves over them, turn off your shaders.
  • Start Simple with Vertical Pistons: Stacking too many observer and piston rows above a single beacon can create chaotic color flickering and briefly obstruct the beam with opaque piston arms. Start with a single row of pistons to get a clean pattern before adding extra tiers.
  • Back-and-Forth vs. One-Way Loops: Use the minecart design if you want the light wave to bounce back and forth automatically without extra wiring. Use the repeater loop design if you want the wave to always sweep from start to finish in the same direction.
  • Arrow Replenishment: In survival mode, remember that the dispenser and target block design consumes or drops arrows over time, so you will occasionally need to collect the fired arrows and refill the dispensers.

Frequently asked questions

Why isn't my beacon changing color immediately?
Beacon colors take a brief game tick to update, and certain third-party shaders can completely freeze the color transition when blocks move too fast. Try turning off shaders or slowing down your redstone clock.
Can I stack multiple stained glass colors on one beacon?
Yes! Pushing multiple stained glass blocks at different heights above the same beacon blends the colors together, though using too many pistons at once can look chaotic.
Do rails block the beacon beam?
No, rails and detector rails are transparent to beacon beams, allowing a minecart to travel directly over the beam while triggering the pistons on the sides.

Components used

More light show