Bedrock Edition World Eater

This Bedrock Edition World Eater is a massive, modular flying machine designed to automatically excavate entire perimeters from the surface all the way down to bedrock. It uses a blast-resistant sky grid for air-burst TNT efficiency, optional liquid sweepers to clear water and lava, and a smart movable AND-gate docking station so machines never launch out of sync.

TNT & CannonsExpertBedrock Edition
Bedrock Edition World Eater video tutorial

Video: INSANE New WORLD EATER Tutorial! Auto Mining Machine! Minecraft Bedrock Edition by silentwisperer

How to build it

  1. Scout and Flatten the Area

    Choose a relatively flat area for your perimeter and clear trees and surface hills down to the lowest natural surface level. Scout underground in a creative copy to check for water caves and obsidian pillars that could block the machines.

  2. Mark the Main Brain & Trench

    Find a 3-wide by 5-deep spot for the main control brain where no chunk border cuts through the middle of it. From one block back and diagonal to the brain, mark a 13-block-wide trench running the entire length of your desired perimeter.

  3. Mark the Side and Return Trenches

    Mark a 2-block-wide side trench leading from the main brain to the far side of the perimeter. On the far side, mark a 3x4 area for the return station brain and a 12-block-wide trench spanning the width of the quarry.

  4. Dig Out the Perimeter Trenches

    Excavate the 13-wide main trench, the 2-wide side trench, and the 12-wide return trench down to the depth you want the World Eater to stop at. These trenches give the docking stations and descent mechanisms room to step down without hitting terrain.

  5. Build the Main Brain Core Pillar

    Inside the 3x5 brain footprint on the side facing the return station, place an upward sticky piston 8 blocks off the ground. Stack 6 slime blocks on top, add another upward sticky piston, and cap it with an L-shape of 3 slime blocks holding 2 trapped chests.

  6. Install Chest Controls & Upper Pistons

    Place temporary solid blocks directly above the trapped chests so you do not accidentally trigger them while building. Below the chest platform, attach two forward-facing sticky pistons, a downward sticky piston, an upper slab, a small slime platform, and a redstone block.

  7. Build the Lower Brain Base

    At the bottom of the main slime pillar, extend 3 slime blocks to the side and 1 slime block up. Using temporary blocks, place two upward-facing observers, an upper slab next to the observer, and a downward-facing regular piston.

  8. Assemble the First Bomber Dock

    On the back of the lower assembly, place a sticky piston, a left-facing observer, and 4 slime blocks in an L-shape. Add 2 redstone blocks and an upward regular piston next to them to act as the docking station for the first bomber.

  9. Add the Vertical Stepper Pistons

    Build a 4-block temporary pillar next to the dock. Place a downward regular piston at the bottom, another at the top with a redstone block powering it and an outward observer, and an upward sticky piston sandwiched between them after removing the temporary blocks.

  10. Complete the Brain Stepper Loop

    At the top of the brain, place an observer facing the return stations, an upward sticky piston with 4 slime blocks extending right, and an upward observer with a regular piston below it. Loop around with a downward observer, downward regular pistons, upward observers, and upward sticky pistons with slime blocks to finish the brain.

  11. Tile the TNT Bombers and Sky Grid

    Repeat the modular bomber and docking sections down the length of your trench to your desired width. Above the bombing path, construct the sky grid out of blast-resistant deepslate slabs and end stone blocks to trigger the bomber observers.

  12. Install Return Stations & Optional Sweepers

    Build the return stations with their movable AND-gate docking system along the 12-wide far trench. If your area contains water or lava, add the lower slimestone liquid sweepers (requires at least 10 to 11 bomber modules of width for proper launch delay).

How it works

This World Eater operates through synchronized slimestone modules controlled by a central brain:

  • Trapped Chest Controls: The two trapped-chest blocks on top of the brain control operation. Opening the right chest fires a single bombing cycle, while opening the left chest sets the system to continuous automatic cycling.
  • Bomber Launch & Delay: When triggered, the brain lowers the array by one block and launches the TNT bombers forward. After a built-in delay running down the length of the array, the lower liquid sweepers launch so they trail safely behind the TNT explosions.
  • Sky Grid & Air-Burst TNT: As each bomber flies across the perimeter, an observer reads the overhead sky grid. Every time it passes an End Stone block, it powers the dispenser. The ignited tnt is briefly held on a blast-resistant platform before dropping, creating an air-burst explosion above the terrain for maximum block destruction.
  • Smart Return AND-Gate: The far side uses a movable AND-gate docking system. The return cycle will not trigger until every single bomber and sweeper has safely docked, preventing out-of-sync crashes if a sweeper gets stuck on stray blocks.

Tips & variations

  • Bedrock Exclusive: Because Minecraft Bedrock does not have TNT duping, every dispenser must be filled with real crafted TNT. Stock up on gunpowder from a creeper or ghast farm and clear a desert for sand.
  • Skip the Sweepers to Save Resources: The entire lower slimestone section is only for clearing liquids. If you are excavating in the Nether, the End, or a dry Overworld area, you can omit the sweepers entirely to cut build time and materials in half.
  • Customize the Sky Grid: If part of your perimeter sits over a huge open cavern, temporarily replace the End Stone in that section of the sky grid with slabs so the bombers stop dropping TNT over empty air.
  • Restarting Stuck Sweepers: Aquifers can occasionally cause TNT to leave stray blocks behind that stop a sweeper. Mine the obstacle and place a torch or block in front of the sweeper's rear observer to send it to the dock; the smart AND-gate will patiently wait for it.
  • Keep Chunks Loaded: Never log out, leave the area, or let the edges enter unloaded chunks while the machine is running. For extra-wide builds, raise your simulation distance, walk alongside the flyers, or have multiple players load the area.

Frequently asked questions

Does this World Eater duplicate TNT?
No. TNT duplication does not exist in Minecraft Bedrock Edition, so the bombers use dispensers filled with real TNT.
Why do I have to use End Stone and Deepslate Slabs for the grid?
The system uses air-burst TNT that explodes close to the flying machines. End Stone and Deepslate Slabs have high blast resistance so stray explosions do not destroy the grid or bombers.
What happens if one of the water sweepers gets stuck on a block?
The return station uses a smart movable AND-gate that waits until every flying machine is docked before relaunching. Clear the block in front of the stuck sweeper and trigger its back observer to resume.
How wide can I build this World Eater?
The design is completely modular and can be tiled as wide as you want. However, if you include the optional water sweepers, it must be at least 10 to 11 bomber sections wide to provide enough delay so the sweepers do not launch into exploding TNT.

Components used

More tunnel bore / quarry