
Video: Minecraft Bedrock: Easy ANCIENT DEBRIS Tunnel Bore Tutorial! 50% Less TNT! MCPE Xbox PC Ps4 by silentwisperer
How to build it
- Dig the Starting Chamber at Y=13
Excavate a clear room in the Nether that is at least 5 blocks tall and 20 blocks long, with the floor at Y-level 13. This places the blast spearhead at Y-level 14, right in the prime Ancient Debris zone and safely underneath the Y=21 Nether lava lakes.
- Build the Rear Engine and Trigger
Start at the back of your chamber: place a regular piston facing forward with a slime block in front of it, then a sticky piston facing backward attached to that slime block. Add two more slime blocks to the rear Engine structure and attach a Target block (or Trapped Chest) to the back or underside of the rear piston so you can trigger it easily.
- Add the Engine Pull Segment
Place a slime block beside the front of the engine with a regular piston facing forward and an observer facing sideways to detect the engine movement. Add another slime block with an observer facing away from the build and a forward-facing regular piston to pull and push the front assembly.
- Build the Timing Extender Modules
Use temporary blocks to leave a 1-block gap in front of the engine, then place a slime block with a side observer and a forward-facing regular piston. Repeat this exact 1-block gap, slime block, observer, and forward piston pattern one more time in front to create the timing delay chain that keeps the TNT launch synchronized.
- Construct the Movable Double Piston Extender
In the middle section, place a forward-facing regular piston using a temporary block, then put an observer facing downward next to it with a slime block on top and an observer facing away. Add two more slime blocks forward with an observer facing into them; this movable double extender ensures the front dispenser is only triggered every second movement.
- Assemble the TNT Dispenser and Launcher
Place two slabs together to form a full solid block at the front of the double extender, with an observer underneath it and a regular piston facing forward. Place an L-shaped cluster of six slime blocks in front to act as the TNT bounce launcher, set an upward-facing Dispenser inside the launcher pocket, and place an upper slab right beside the dispenser.
- Attach the Ancient Debris Spearhead
Extend a line of 5 bottom slabs forward from the front slime assembly, followed by a double-slab full block. Place 1 Ancient Debris block at the very tip of the spearhead to absorb the TNT blasts, and clear any Netherrack directly in front of the lowest slime block so the machine will not snag.
- Dry-Run and Load TNT
Before adding TNT, shoot the side of the Target block (or open the Trapped Chest) once to verify the entire machine shifts forward one block, then trigger it a second time and listen for the dispenser click. Once verified, fill the dispenser with TNT—every second activation will launch primed TNT onto the tip of the Ancient Debris spearhead.
- Tile Additional Modules (Optional)
To widen your bore, attach a 6-block slime arm extending sideways from the rear engine with an observer watching it. Build a second identical bore module next to the first (offset 1 block forward with a 9-block gap between spearheads), replacing the second module's Target block with a solid block.
How it works
This tunnel bore breaks down into five functional sections arranged in a line:
- Rear Engine: Shooting the
targetblock or opening thetrapped-chestupdates the rearpiston, pushing the machine forward by 1 block while thesticky-pistonpulls the tail along. - Timing Extenders: Two staggered
slime-block,observer, andpistonsegments relay the push forward with a slight mechanical delay so the launcher does not fire prematurely. - Movable Double Piston Extender: The middle section acts as a mechanical T flip-flop / 2-step actuator. On the first activation it shifts position without completing the forward observer connection; on the second activation it extends fully to pulse the front section.
- TNT Dispenser & Bouncer: Every second step, the front observer powers the upward-facing
dispenserand aslime-blockpusher simultaneously, tossing the primedtntforward in an arc. - Blast Spearhead: A 5-block bridge of bottom slabs keeps the blast away from the redstone components. The TNT lands on the very front edge of a single blast-proof Ancient Debris block, maximizing downward and forward block destruction while protecting the machine.
Tips & variations
- Never shoot the top of the Target block: If an arrow lands on top of the Target block and rides along with the flying machine, it will repeatedly re-trigger the bore as it moves and cause the machine to blow itself up. Always shoot the side or bottom face, or use a Trapped Chest.
- Wait between activations: Always wait a couple of seconds for the entire flying machine (and all tiled modules) to come to a complete stop before triggering it again.
- Clear obstacles along the path: After every blast, check that no exposed Ancient Debris, falling gravel, or stray Blackstone is touching the slime bars or sitting directly in front of the spearhead. Plug any ceiling lava streams so they do not dampen the TNT explosions.
- Honey block substitution: Most of the rear and middle slime segments can be built with Honey Blocks, though the front TNT launcher assembly must remain Slime Blocks to bounce the TNT forward.
- Simulation Distance tiling: On Simulation Distance 4 you can safely tile 4–5 modules side by side; on Simulation Distance 6 or higher you can chain 6 or more modules.





