Automatic Jukebox with Track Skip

Since Minecraft 1.19.4, jukeboxes emit a redstone signal while playing, which locks any regular hopper underneath and prevents easy track skipping. This compact automatic jukebox uses a hopper minecart to bypass that lock, allowing you to continuously shuffle music discs, skip songs on demand with a note block, or stop playback completely with a button.

Music & SoundIntermediateJava Edition
Automatic Jukebox with Track Skip video tutorial

Video: 3 Auto-Jukebox Designs For Your Base (Java 1.19.4+) by Michael2_3B

How to build it

  1. Set Up the Base Observer Line

    Clear a 4x3 footprint. Place a solid building block with a note block next to it, run an observer reading that note block into another observer facing upward, and top it with a solid building block.

  2. Install the Dropper & Hopper Loop

    Place two droppers facing upward in a vertical column. Attach two hoppers feeding into the bottom dropper to collect ejected discs and return them to the shuffler.

  3. Embed the Hopper Minecart in Iron Bars

    Place a temporary rail on top of the hopper beneath the jukebox spot, set a hopper minecart on it, and break the rail (check the dropper or hopper in case it picked the rail up). Place a sticky piston with an iron bar in front of the minecart, put a temporary button on the piston, and press it to push the iron bar directly inside the hopper minecart.

  4. Place the Jukebox and Skip Note Block

    Place a barrel next to the hopper line and put your jukebox directly above the embedded hopper minecart. Place the second note block next to the jukebox—this will be your manual Play/Skip button.

  5. Wire the Upper Observer & Piston Trigger

    Place an observer detecting the skip note block, leading into a sticky piston. Add a solid building block and a downward-facing observer next to it to send the pulse down to the lower circuit.

  6. Add Repeaters and the Reset Piston

    Run two redstone repeaters from the observer line—set the first repeater to 4 ticks and the second repeater to 2 ticks. Place a regular piston at the end of the line facing the hopper minecart so it can push the minecart back under the jukebox.

  7. Connect the Feed Hopper and Controls

    Attach the final hopper so it feeds directly from the top dropper into the jukebox. Place a button on the solid block beside the jukebox to act as your Stop button, and optionally place a flower pot with a flower on top of the skip note block to mute its note sound.

  8. Load Music Discs and Test

    Divide your favorite music discs between the two droppers. Right-click the skip note block to start playing a random track, click it again at any time to skip to a new song, or press the button to stop the music completely.

How it works

In Minecraft 1.19.4 and newer, an active jukebox emits a full redstone output that powers and locks any normal hopper directly underneath it. However, a hopper minecart does not get locked by the jukebox above it and will immediately pull a disc out the moment its hitbox reaches beneath the jukebox.

  • Track Skip & Auto-Next: The hopper minecart is held inside an iron bar block so it only shifts slightly between two positions. When a song finishes naturally—or when you right-click the note block—the observer chain fires the sticky piston and shifts the hopper minecart under the jukebox to pull out the current disc.
  • Random Disc Feed: The extracted disc drops into the lower hoppers and enters the two upward-facing droppers. At the same time, the pulse powers the droppers to push a randomly selected disc into the top hopper and back into the jukebox, while the delayed repeaters (4 ticks and 2 ticks) fire the regular piston to push the hopper minecart back out of range.
  • Stop Button: Pressing the button pulls the currently playing disc out without firing the droppers to insert a new one, halting playback until you hit the note block again.

Tips & variations

  • Simpler Auto-Play Variant (2x4): If you don't need a skip button, you can build the basic 2x4 version shown first in the video using just 1 comparator, 2 repeaters, 1 redstone dust, 2 droppers, 3 hoppers, a barrel, and a button. It waits for the track to end before unlocking the bottom hopper and cycling the next disc.
  • No-Repeat Queue Variant (8x7): Because droppers pick slots at random, the compact 4x3 design can occasionally play the same song twice in a row. The third design in the video solves this on an 8x7 platform by floating a hopper minecart on a zero-ticked piston and storing played discs in a secondary chest buffer until the main dropper is completely empty.
  • Muting the Control Note Block: Placing a flower pot on top of the interactive note block stops it from playing an instrument note when clicked while still letting the observer detect the interaction.
  • Survival Playlist Tip: Leave out discs 11, 13, and 5 when loading the droppers if you only want upbeat background music in your base.

Frequently asked questions

Why can't a normal hopper skip songs in Minecraft 1.19.4+?
Starting in Java Edition 1.19.4, jukeboxes emit a redstone signal while playing a disc. This powers and locks any regular hopper directly beneath the jukebox until the song finishes, whereas a hopper minecart ignores that lock and can pull the disc out immediately.
Why do we push an iron bar into the hopper minecart?
Embedding the hopper minecart inside an iron bar restricts how far the pistons can push it horizontally, allowing it to toggle cleanly between extracting the disc under the jukebox and resting just outside of range.
How do I stop the note block from making noise when I click it to skip?
Place a flower pot (with an optional flower) on top of the note block, or place any solid block above it so the note is muffled while the observer still triggers.

Components used

More jukebox controller