Instant NOT Gate

Standard redstone torch inverters introduce a brief delay before changing state. This instant NOT gate uses a continuously running 1-tick clock and a blocking input wire to invert a redstone signal with instant on and instant off response. It is ideal for high-speed redstone computing and experimental instant-wire setups.

Logic GatesAdvancedJava Edition
Instant NOT Gate video tutorial

Video: Minecraft Redstone Instant NOT Gate by Ray57a

How to build it

  1. Orient Your Build to Facing 0

    Before placing any components, open your debug screen and align your build direction to facing 0 (South). Ultra-fast circuits that rely on within-tick update order are directional and must face the proper direction to work.

  2. Build a 1-Tick Clock

    Construct a fast 1-tick clock at the rear of your build area. Have the clock drive two alternating repeaters so that a pulse is generated on every single tick.

  3. Merge the Clock into a Target Block

    Point both alternating repeaters from your 1-tick clock directly into a single solid block. Because the repeaters fire on opposite phases, this block is newly powered every single tick.

  4. Route the Output Line

    Lead a line of redstone dust out from the continuously pulsed clock block toward your output repeater. When unobstructed, the constant stream of 1-tick pulses flows down this path to keep the output powered.

  5. Connect the Blocking Input Wire

    Run your main input redstone line (controlled by a lever or upstream circuit) into the junction so it acts as a blocking signal against the output repeater. Toggling this input line on will immediately block the clock stream, and turning it off will instantly let the signal through.

How it works

This circuit avoids the 1-tick delay of a standard redstone torch by keeping a live signal primed on every tick:

  • Continuous Clock Generation: A 1-tick clock feeds a solid block through two alternating Redstone Repeaters. Because the repeaters alternate, a fresh signal enters that block on every single tick.
  • Instant Off (Input ON): Your main input signal is routed down the blocking wire. While the input is ON, it continuously blocks the output repeater from passing the clock's pulses, holding the output OFF immediately.
  • Instant On (Input OFF): The moment the blocking input turns OFF, the very next pulse already born in the clock block travels down the output line without waiting for a torch or repeater to warm up.

Tips & variations

  • Directionality Matters: As noted in the demonstration, high-speed tick-order circuits are sensitive to orientation. Make sure the main axis points toward facing 0.
  • Legacy Mechanics: This design relies on classic Java Edition update-order behavior used in early instant-wire and edge-detector experiments. Test it in a creative world first if building in newer versions.
  • Noise Reduction: Because this uses a constantly running 1-tick repeater clock instead of pistons, the gate itself operates completely silently.

Frequently asked questions

Why doesn't this instant NOT gate use a redstone torch?
A redstone torch takes 1 redstone tick (2 game ticks) to toggle states. By using a constantly firing 1-tick clock and a blocking wire, the circuit reacts within the same tick the input changes.
Why isn't my gate inverting instantly?
Check your orientation using the F3 debug screen. Very fast circuits depend on internal block update order, and this setup is designed to point toward facing 0.
Why does the clock need two repeaters feeding the block?
A standard 1-tick clock alternates between two states. Using two alternating repeaters ensures that a new signal is born inside the target block on every single tick rather than every other tick.

Components used

More not gate