Dried Kelp Block Crafter & Smelter

This 1-wide tileable contraption takes raw kelp from a farm, smelts it in a smoker, and automatically crafts it into dried kelp blocks using the 1.21 Crafter. Better yet, it routes the crafted blocks back into the smoker to completely refuel itself while sending excess fuel blocks to your storage and banking XP.

Item CircuitsIntermediateJava Edition
Dried Kelp Block Crafter & Smelter video tutorial

Video: Minecraft 1.21 | Dried Kelp Block Crafter | Tile-able Refueling XP & Fuel Farm by xisumavoid

How to build it

  1. Place the Crafter and Smoker

    Start at the bottom by placing your Crafter facing directly into the bottom of a vertical column of three Droppers. One block above the Crafter, place a Smoker with a Hopper underneath it feeding the smelted dried kelp down into the Crafter.

  2. Set Up the Raw Kelp Input

    Place a Hopper on top of the Smoker to feed raw kelp in. If you are tiling multiple slices side by side, run a horizontal Hopper chain (or an ice and water stream) across the top Hoppers, and place a Composter on top of the input Hopper to reduce lag.

  3. Build the Signal Strength 8 Reader

    Have a Redstone Comparator read the Crafter from the side, pointing into a block with a piece of Redstone Dust on it. Place a second Comparator reading a completely filled Composter (level 8) pointing into that same Redstone Dust so the dust is held at signal strength 8.

  4. Wire the Observers to the Crafter

    Place an Observer watching the Redstone Dust so it detects when the signal strength ticks from 8 to 9. Chain Observers from that first Observer to carry the pulse both down into the Crafter and up toward the Dropper tower.

  5. Build the 3-Dropper Elevator

    Stack three Droppers vertically right against the output face of the Crafter, with the bottom two pointing straight up and the top Dropper pointing horizontally toward the Smoker side. Have the upper Observer line power the middle Dropper directly, which will also activate the Droppers above and below it.

  6. Connect the Refueling & Output Hoppers

    Point the top Dropper into an output Hopper line that leads to your collection Chest at the end of the array. Directly underneath that output Hopper, place a refueling Hopper pointing into the side of the Smoker.

  7. Add Blocker Items to the Fuel Hopper

    Open the refueling Hopper that feeds the side of the Smoker and put 4 blocker items (renamed or non-fuel items) into its last four slots. This limits how many dried kelp blocks are buffered inside the hopper before excess blocks flow past to your output chest.

How it works

This circuit combines smelting, 9-item counting, and priority refueling in a single 1-wide slice:

  • Lag-free 1-Wide Tileable Detection: A full Composter forces the Redstone Dust to rest at signal strength 8 via a Comparator. While the Crafter fills from 1 to 8 dried kelp, the dust never changes state. The moment the 9th dried kelp enters the Crafter, the Crafter's Comparator outputs strength 9. Because adjacent slices only ever toggle between 8 and 9, the signal never bleeds into neighboring slices with enough strength to trigger them.
  • Crafting & Elevator Firing: The Observer watching the dust detects the change from 8 to 9 and fires a pulse. One branch powers the Crafter, ejecting a freshly crafted Dried Kelp Block directly into the bottom Dropper. Another Observer powers the middle Dropper slightly after, pulsing all three vertical Droppers and shooting the block up into the top output Hopper line.
  • Self-Refueling Priority: As dried kelp blocks travel along the top output Hopper chain, the Hopper directly underneath pulls them down to feed the Smoker's fuel slot. Putting 4 filler items in this fuel Hopper means it only buffers a single stack of fuel; once full, all extra dried kelp blocks ride the upper Hopper chain into your storage chest.

Tips & variations

  • Harmless Dropper Quirk: In a tiled array, powering the middle Dropper in one slice also quasi-powers the adjacent Droppers in neighboring slices. A dried kelp block may occasionally pause inside the elevator, but the next crafting cycle quickly pushes it the rest of the way up.
  • 12-Slice Hopper Limit: Because a Hopper chain transfers 2.5 items per second and a Smoker smelts 1 kelp every 5 seconds (0.2/sec), a single input Hopper line can only feed up to 12 slices at full speed. For larger farms, split your input into multiple 12-wide modules or run a water stream over ice across the top Hoppers.
  • Claiming Banked XP: Every smelted kelp stores 0.1 XP inside the Smoker. Lock the Hopper underneath a Smoker (for example with a Lever) and manually pull out one smelted dried kelp to collect all accumulated XP levels.

Frequently asked questions

Why does this design use a full Composter next to the Comparator?
A full Composter outputs a constant signal strength of 8. Holding the redstone dust at strength 8 ensures it only changes state when the Crafter reaches 9 items (strength 9), preventing signal crosstalk between adjacent 1-wide slices.
How many slices can I tile together in one row?
If you use a hopper chain to feed raw kelp in, you can tile up to 12 slices per input line because of hopper transfer speed (2.5 items/second). If you use a water and ice stream over the input hoppers, you can tile as many slices as your kelp farm can supply.
How much fuel and XP does a 12-wide array produce?
Running continuously, a 12-smoker array produces roughly 8.8 dried kelp blocks per minute (before refueling deduction) and banks about 14.4 XP points per minute across the smokers.

Components used

More auto crafter