Bedrock TNT Duper Flying Machine

This tutorial shows you how to build a working TNT duplicator attached to a flying machine in Minecraft Bedrock and Education Edition. Unlike Java Edition, Bedrock requires a special setup rig using tall grass, water, and lava to create a glitched TNT block first. Once prepared, the flying machine will continuously duplicate and drop lit TNT as it travels forward, making it ideal for clearing large areas or digging perimeters.

TNT & CannonsAdvancedBedrock Edition
Bedrock TNT Duper Flying Machine video tutorial

Video: Minecraft Bedrock 1.21.90 TNT Duper Flying Machine by Reality

How to build it

  1. Start the Duper Setup Rig

    Place a solid block with a lever attached to it. In front of that block, place two more blocks in a line, adding a 1-tick repeater on the first and redstone dust on the second.

  2. Place First Piston and Delay

    Place a sticky piston diagonally forward from the dust. Extend two blocks out from the side, placing a 4-tick repeater on the first block and redstone dust on the second.

  3. Build the Repeater Delay Line

    Run a line of four blocks heading back toward the start. On the first three blocks, place two 4-tick repeaters followed by one 3-tick repeater, then put redstone dust on the fourth block.

  4. Connect the Second Sticky Piston

    Place four more blocks leading around to the front, placing a second sticky piston at the end and running a trail of redstone dust across the blocks to connect it to the repeater line.

  5. Build the Liquid Containment Frame

    Build a glass cage around the front of the second sticky piston with an opening on top and a pocket underneath. Place a dirt or grass block at the bottom of the frame to hold vegetation.

  6. Add Slime, Tall Grass, and Liquids

    Place a slime block directly in front of the sticky piston and plant tall grass on the grass block next to it. Pour lava so it flows toward the grass space and place water in the top opening so it flows straight down.

  7. Prime the Glitched TNT

    Attach your single TNT block underneath the slime block. Double-check your five repeaters (1 tick, 4 ticks, 4 ticks, 4 ticks, 3 ticks), then flick the lever; the TNT should vanish and reappear in a glitched state once you break the piston.

  8. Clear the Rig

    Carefully remove the lava, water, and the redstone setup rig without breaking the glitched TNT block or letting the lava ignite it. Keep track of the direction the pistons were pushing.

  9. Build the Front Flying Module

    Place three slime blocks on top of the setup area aligned with the original push direction before clearing the remaining rig blocks. Add an observer at the end, a regular piston, and another slime block on top.

  10. Attach the Engine and Launch

    Extend a line of four slime blocks toward the back, then add an outward-facing observer and an upward sticky piston. Finish the engine with one more observer and a sticky piston facing the front module, then update the rear observer to start the machine.

How it works

This machine works in two distinct phases due to how block updates are handled in Minecraft Bedrock Edition:

  • Phase 1 (Creating the Glitched Block): Bedrock Edition does not have Java's quasi-connectivity or standard update-order TNT duping. Instead, the five-repeater circuit (set to 1, 4, 4, 4, and 3 ticks) times two sticky pistons to push a slime block and TNT into a space where water, lava, and a two-block-tall plant (tall grass) interact on the exact same game tick. This desynchronizes the client and server block data, creating a ghost/glitched TNT state when the piston is broken.
  • Phase 2 (The Flying Machine): Once the TNT is in its glitched state, the two-way slime block flying machine pushes it forward. Every time the sticky pistons and regular piston cycle via the observers, the glitched TNT block duplicates itself into a primed TNT entity that falls to the ground while the block form continues moving with the slime structure.

Tips & variations

  • Clear the Lava First: When dismantling the initial setup rig, always bucket up the lava first and wait for it to drain completely so a stray flow does not ignite and destroy your glitched TNT.
  • Keep Chunks Loaded: Like all flying machines, you must follow the machine as it flies to keep the chunks loaded. If it enters unloaded chunks or you unload the area mid-push, the pistons can break and stop the duper.
  • Height Placement: Build the rig high enough above the terrain so the falling TNT does not blow up the slime blocks of the flying machine itself.
  • Bedrock Exclusive: This specific tall-grass and liquid block-duplication mechanic is designed for Minecraft Bedrock and Education Edition (1.21.90) and does not work on Java Edition.

Frequently asked questions

Does this TNT duper flying machine work on Minecraft Bedrock and consoles?
Yes, this design is specifically built for Bedrock Edition, including Xbox, PlayStation, Pocket Edition, and Education Edition.
Why do I have to build the first redstone machine just to break it?
The first machine is a setup rig that uses precise repeater timings, tall grass, water, and lava to force the TNT into a glitched state. Once the TNT is glitched, you no longer need the setup rig.
Why did my TNT blow up while breaking the first machine?
If the lava from the setup rig touches the TNT or creates fire nearby while you are clearing the glass frame, it can ignite the TNT. Always remove the lava bucket first before breaking the containment blocks.

Components used

More tnt duplicator