Bedrock Flying Machines Guide

Flying machines in Minecraft Bedrock Edition use pairs of regular and sticky pistons to push and pull slime or honey blocks in a continuous loop. This guide walks you through five core Bedrock slimestone designs: a tiny 6-block continuous flyer, a 1-block-per-click step machine, a TNT carpet bomber, a reversible two-way flying machine, and an automated TNT tunnel bore.

Piston ContraptionsIntermediateBedrock Edition
Bedrock Flying Machines Guide video tutorial

Video: FLYING MACHINES - COMPLETE GUIDE MINECRAFT BEDROCK EDITION by Spoonmuppet

How to build it

  1. Basic 6-Block Continuous Flying Machine

    Pillar up into the air and place two slime blocks side by side. Attach a regular piston facing the direction you want to travel, and a sticky piston facing the opposite way.

  2. Add Observers and Launch the Basic Flyer

    Using temporary blocks above the machine, place two observers facing straight down into the slime blocks, then remove the temporary blocks. Trigger either observer with flint and steel to start the machine, and place obsidian in front of it to stop it.

  3. Build the 1-Block Step Flying Machine

    Place two vertical stacks of two slime blocks adjacent to each other. Add two observers facing down, a regular piston pointing forward, and a sticky piston pointing backward so that triggering the observer over the regular piston moves the craft forward just one block at a time.

  4. Upgrade to a Semi-Auto Carpet Bomber

    On your step machine, place a slime block and a fence gate above the regular piston to act as a manual trigger. Attach two downward-facing dispensers to the side slime blocks and put two downward-facing observers on top of those dispensers, then fill them with TNT.

  5. Make the Carpet Bomber Fully Automatic

    Place one more observer facing into the fence gate so that every one-block step updates the gate and re-triggers the engine automatically. To stop the bomber, break that observer.

  6. Set Up the Two-Way Flying Machine Stations

    Place two immovable obsidian blocks at either end of your desired path. Attach a lever to each obsidian block and place an upward-facing dropper next to each one.

  7. Build the Two-Way Flying Machine Core

    Coming off the starting station, place an inward-facing observer and a line of three slime blocks, followed by an upward regular piston, a sticky piston, and an observer pointing into that sticky piston. Mirror the second half with three more slime blocks, an opposing sticky piston, an observer, a downward regular piston, and an outer observer so both halves can swap roles.

  8. Build the Tunnel Bore Engine and Delay Line

    Start with the 1-block step engine five blocks above the ground, add an extra slime block off the sticky piston side, and run a line of seven upward-facing observers underneath a row of slime blocks and a sticky piston. Around the perimeter, arrange slime block segments with observer-piston pairs to pass the signal around in a timed loop.

  9. Add the TNT Launcher and Blast Shield

    At the front of the bore, mount an upward-facing observer feeding into an upward-facing dispenser with slime blocks positioned to bounce the primed TNT forward. Place a fence gate with a feedback observer to automate the loop, put an ancient debris block (or end stone brick wall) at the front as a blast shield, and load the dispenser with TNT.

  10. Expand to a Two-Module Tunnel Bore

    To widen the tunnel, branch three slime blocks out to both sides of the front pushing section while shifting the central connectors to the outer edges so each piston stays at 11 pushed blocks (under the 12-block push limit). Add a second TNT dispenser module on the wing and fill both with TNT.

How it works

In Minecraft Bedrock Edition, sticky pistons cannot spit out their blocks on a 1-tick pulse like they do in Java Edition. Because of this, Bedrock flying machines pair one regular piston (to push the front half forward) with one sticky piston (to pull the back half along).

  • Continuous Loop: When an observer moves, it emits a redstone pulse into the slime or honey block below it, powering the adjacent piston. Pushing the opposite half moves the second observer, which then fires the second piston in an endless cycle until the craft hits an immovable block or exceeds the 12-block piston push limit.
  • Two-Way Reversal: Because Bedrock lacks block-dropping, a two-way flyer uses vertical regular pistons to shift the structure up or down at the docking stations, aligning the active sticky piston and observer pair for the return trip when you flick the station lever.
  • Tunnel Bore Cycle: Opening the fence gate advances the bore by one block and sends an observer chain around the frame. The dispensers drop TNT onto a slime block right before the front launcher piston fires, flinging the primed TNT ahead of the blast-resistant ancient debris shield.

Tips & variations

  • Slime vs. Honey Blocks: Honey blocks work great for basic flying machines and allow players to slide down them or ride along, but they are not bouncy. Never use honey blocks for the launching mechanism of a TNT tunnel bore—the TNT will stick instead of launching and blow up your machine.
  • Tiling Machines Side-by-Side: Slime blocks and honey blocks do not stick to each other. Alternate between slime and honey modules when building wide moving walls or multi-segment houses so adjacent engines don't lock together.
  • Non-Stick Blocks: Use glazed terracotta, obsidian, crying obsidian, or bedrock around flying machine pathways, as neither slime nor honey will grab them.
  • Stopping the Tunnel Bore Safely: Never stop the automatic tunnel bore mid-cycle while TNT is primed. Break the observer feeding the fence gate and let the current cycle finish completely before approaching.

Frequently asked questions

Why do Bedrock flying machines need both a regular piston and a sticky piston?
In Bedrock Edition, sticky pistons always retract the block in front of them regardless of pulse length. Using one regular piston to push and one sticky piston to pull prevents the two halves from simply pulling each other back and forth in place.
Can I build the TNT tunnel bore with honey blocks instead of slime blocks?
No. While honey blocks can move the frame of a basic flying machine, they do not have the bouncy property of slime blocks, so the dispensed TNT will not launch forward and will destroy the bore.
Why did my flying machine stop moving in mid-air?
A piston can only push up to 12 blocks at once. If you attach too many dispensers, slime blocks, or blast shields to a single module—or if the machine runs into an immovable block like obsidian—it will stall.

Components used

More flying machine