
Video: poster boy note block tutorial by rubrubu
How to build it
- Gather Materials and Prepare the Area
Check the material overview at the start of the video (0:52) and clear a large, flat space for the 12-section track. Installing a visual note block pitch resource pack is helpful if you want to see the tuning numbers directly on the blocks.
- Place the Starting Trigger and Part 1 (0:57)
Place a starting block with a button to launch the song, then lay out the first row of repeaters and instrument blocks. Place the note blocks on top and right-click them the exact number of times shown in the video.
- Build Parts 2 and 3 (3:25 - 5:45)
Continue the repeater chain from the end of the first section and carefully set each repeater tick delay to maintain the song's tempo. Add the side branches for chords and percussion where multiple note blocks play simultaneously.
- Construct Parts 4 Through 6 (8:08 - 12:39)
Extend the circuit or snake the redstone line back around to keep the build within loaded chunks. Double-check the blocks placed underneath each note block so the bass, drum, and melody instruments match the original track.
- Wire Parts 7 Through 9 (14:44 - 18:53)
Follow the video guides for the middle-to-late sections of the song, paying close attention to repeaters with longer delays during rests and beat drops. Ensure adjacent rows of redstone dust do not accidentally connect and cross-trigger notes.
- Finish Parts 10 Through 12 (21:16 - 25:39)
Complete the final three segments of the song by placing and tuning the remaining note blocks and connecting the last repeater chain.
- Test the Complete Song (27:25)
Press the starting button and walk along the circuit as it plays to verify every note sounds on beat. Adjust any mistuned note blocks or misclicked repeater delays if a section sounds off-key.
How it works
Note block circuits rely on sequential signal timing and block-based instrument selection:
- Trigger and Tempo: Pressing the start button sends a redstone pulse into a long chain of
Redstone Repeaters. Each repeater delays the signal by 1 to 4 redstone ticks, establishing the rhythm and spacing between notes. - Chords and Layers: When multiple notes need to play at the exact same moment, the main repeater line splits using
Redstone Dustor parallel repeaters to power two or moreNote Blockssimultaneously. - Instruments and Pitch: The block placed directly underneath a note block determines which instrument plays (such as wood for bass, stone for percussion, or dirt/air for harp). Right-clicking the note block cycles its pitch through 25 semitones across two octaves.
Tips & variations
- Keep Air Above Note Blocks: Every note block must have at least one full air block directly above it; otherwise, it will be completely muted when powered.
- Use a Note Block Resource Pack: The creator uses the Better Jappa Noteblocks texture pack (linked in the video description), which displays the current pitch number and instrument directly on the side of each note block for much faster tuning.
- Avoid Unintended Connections: When snaking the track back and forth to save space, leave at least a one-block gap between parallel lines of redstone dust so the signal does not loop backwards.
- Chunk Loading: Build the song in a compact, folded layout rather than one massive straight line so the entire redstone circuit stays within your active simulation distance while playing.


