Crab Rave Note Block Song

This tutorial shows you how to recreate the iconic "Crab Rave" meme melody by Noisestorm using a simple chain of note blocks and redstone repeaters. It is a great decorative circuit for base entrances, party rooms, or custom doorbells, and can easily be wired into a continuous loop.

Music & SoundBeginnerJava & Bedrock
Crab Rave Note Block Song video tutorial

Video: Crab Rave Minecraft Noteblock Tutorial | Meme song Note block tutorial by Jon0201 Musicraft

How to build it

  1. Prepare the Base and First Note

    Place your chosen instrument block (Dirt gives the standard piano/harp sound) on the ground where each note block will sit. Place your first note block and right-click it 8 times (8 clicks).

  2. Notes 2 to 4

    Place a repeater set to 2 ticks leading into a note block tuned to 16 clicks. Add another 2-tick repeater into a note block at 13 clicks, followed by a 2-tick repeater into another note block at 13 clicks.

  3. Notes 5 and 6

    Continue the chain with a repeater on 1 tick leading into a note block on 8 clicks. Next, place a repeater on 2 ticks followed by another note block tuned to 8 clicks.

  4. Notes 7 to 9

    Place a repeater set to 1 tick leading into a note block on 15 clicks. Follow this with a 2-tick repeater into a note block on 11 clicks, and another 2-tick repeater into a second note block on 11 clicks.

  5. Notes 10 and 11

    Add a repeater set to 1 tick leading into a note block tuned to 8 clicks. Then place a repeater set to 2 ticks followed by another note block on 8 clicks.

  6. Notes 12 to 14

    Place a repeater on 1 tick leading into a note block tuned to 15 clicks. Next, place a 2-tick repeater into a note block on 11 clicks, followed by a 2-tick repeater into another note block on 11 clicks.

  7. Notes 15 and 16

    Continue the line (curving around if you want the track to loop back to the start) with a 1-tick repeater into a note block on 6 clicks. Follow it with a 2-tick repeater into another note block on 6 clicks.

  8. Notes 17 and 18

    Place a repeater set to 2 ticks leading into a note block tuned to 10 clicks. Add another 2-tick repeater followed by a second note block on 10 clicks.

  9. Notes 19 and 20

    Place a repeater on 1 tick leading into a note block on 11 clicks. Finish the 20-note sequence with a 1-tick repeater leading into the final note block tuned to 10 clicks.

  10. Loop and Power the Song

    If you arranged the chain in a rectangle leading back to the first note block, place a final 1-tick repeater between the 20th and 1st note blocks to make it loop. Place a pressure plate or button next to the first note block to trigger the song.

How it works

This circuit works as a simple sequential delay line (and an optional repeater clock):

  • Signal Propagation: When you step on the pressure plate, it powers the first note block. Each redstone repeater pulls the redstone signal from the note block behind it and pushes it into the next note block in the chain.
  • Rhythm Control: By alternating the repeaters between 1-tick (0.1 seconds) and 2-tick (0.2 seconds) delays, the circuit creates the syncopated rhythm of the Crab Rave melody.
  • Looping: Connecting the 20th note block back to the 1st note block with a 1-tick repeater turns the entire line into a large redstone clock that repeats the riff endlessly once triggered.

Tips & variations

  • Changing Instruments: The video uses Dirt underneath the note blocks for the default piano/harp sound, but you can swap those 20 under-blocks for Emerald Blocks (bit sound), Iron Blocks (iron xylophone), or Packed Ice (chime) for a different style.
  • Space above Note Blocks: Always leave at least one air block directly above every note block, otherwise it will be muted and play no sound.
  • Repeater Direction: Make sure every repeater's arrows point forward along the path of the song. If one repeater is backwards, the song will stop at that point.
  • Stopping the Loop: If you connect the final repeater to loop the song, stepping on the pressure plate for too long will flood the loop with a solid signal. Tap a button or step off the pressure plate quickly to send a short pulse, and break one repeater if you want to stop the loop.

Frequently asked questions

Why are my note blocks not making any sound?
Note blocks require an empty air block directly above them to play a sound. Also check that your game's Jukebox/Note Blocks volume slider is turned up in the audio settings.
Do I need redstone dust to connect the corners?
No. While you can use redstone dust to turn corners, if you curve the alternating chain of note blocks and repeaters directly into a rectangle, the repeaters can connect all 20 note blocks into a loop without needing any dust.
Does this Crab Rave note block song work on both Java and Bedrock?
Yes! Basic note block pitches and repeater tick delays behave identically in both Minecraft Java Edition and Bedrock Edition.

Components used

More note block song