Ultra-Fast Comparator Clock

An ultra-fast comparator clock generates rapid redstone pulses in a tiny footprint. It is ideal for powering dispensers, droppers, or any mechanism that requires a continuous, high-speed trigger. Because it is so simple, you can build it in seconds during early survival or creative testing.

ClocksBeginnerJava Edition
Ultra-Fast Comparator Clock video tutorial

Video: Minecraft - Ultra-fast clock with Redstone Comparators by JuryDutySummons

How to build it

  1. Place the Redstone Comparator

    Place a single redstone comparator on the ground facing away from your power source.

  2. Set to Subtract Mode

    Right-click (or use the secondary action key on) the comparator so its front single torch lights up, putting it into subtraction mode.

  3. Loop the Redstone Dust

    Place a piece of redstone dust directly in front of the comparator, then route two more pieces alongside it so the dust connects back into one of the comparator's side inputs.

  4. Add the Power Source

    Place a lever (or redstone torch) directly behind the comparator's rear input and flip it on to start the rapid pulsing.

  5. Connect Your Output

    Extend a line of redstone dust from the front of the clock loop to whatever device you want to power rapidly.

How it works

This clock relies on the subtraction mode of the redstone comparator:

  • When the lever is turned on, it feeds a full signal strength of 15 into the back of the comparator.
  • The comparator outputs a signal of 15 to the dust in front of it. That signal travels around the dust loop into the side input, decaying slightly along the way (entering the side at strength 13).
  • In subtract mode, the comparator calculates Rear Input - Side Input (15 - 13 = 2). The output immediately drops to strength 2, which isn't strong enough to reach the side input next tick.
  • With the side input now at 0, the comparator outputs 15 again on the very next redstone tick, repeating the cycle endlessly at high speed.

Tips & variations

  • Watch Out for Lag: As shown in the video, running a very long line of redstone dust off this clock causes hundreds of lighting and block updates per second, which can severely drop your frame rate. Keep the output wire as short as possible.
  • Common Mistake: If the dust simply stays lit instead of flashing, make sure the comparator's front torch is turned on (subtract mode) and that your output wire isn't accidentally feeding a full strength of 15 straight into the side without decaying.
  • Easy Toggle: Using a lever at the back makes it easy to shut the clock off when not in use so it doesn't lag your base or server.

Frequently asked questions

Why is my comparator clock staying solid instead of blinking?
You likely forgot to right-click the comparator to put it into subtract mode (the single front torch must be glowing).
Why does this clock drop my FPS when I connect a long wire?
Because the clock toggles every single redstone tick, every piece of connected redstone dust constantly updates its signal strength and visual particles, which is heavy on performance.
What can I power with an ultra-fast comparator clock?
It is commonly used to rapidly fire dispensers and droppers, trash items into lava, or trigger note blocks and pistons at maximum speed.

Components used

More comparator clock