Automatic Potion Brewing Station

This automatic potion brewing station simplifies potion making by letting you queue ingredients and Blaze Powder with the push of a button while automatically refilling water bottles behind the scenes. It includes built-in safety locks that pause the water bottle filler whenever the brewing stand is full or when you run out of empty glass bottles. It is an ideal compact upgrade for any survival base brewing room on both Java and Bedrock Edition.

Contraptions & GadgetsIntermediateJava & Bedrock
Automatic Potion Brewing Station video tutorial

Video: Minecraft Tutorial | Auto Potion Station | Bedrock & Java | EASY and Simple by K1 Inc.

How to build it

  1. Place the Brewing Stand and Blaze Powder Dropper

    Start with a 19x5 area (4 blocks tall). At one end of the front row, place 3 building blocks, put your Brewing Stand on the middle block, and place a Dropper on the outer side facing directly into the Brewing Stand for Blaze Powder.

  2. Set Up the Water Filler Dispenser

    Place a Hopper directly behind the Brewing Stand feeding into it. Leave a 1-block gap behind that Hopper (using a temporary block underneath) and place a Dispenser facing forward toward the Hopper.

  3. Build the Full-Hopper Sensor

    Under the gap between the Hopper and Dispenser, place a block with a Redstone Comparator reading from the Hopper Behind the Brewing Stand. Place a block next to the Comparator with an activated Lever on its side and a piece of Redstone Dust on top.

  4. Install the Empty Bottle Barrel Input

    Run two Hoppers into the back/side of the Dispenser and place a Barrel on top of the outer Hopper so you can easily drop empty Glass Bottles into the system.

  5. Add the Empty-Supply Lock Torch

    Build a V-shaped support of 3 blocks next to the input Hopper under the Barrel. Place a Comparator reading that Hopper pointing into a block that holds a Redstone Torch on its side.

  6. Construct the Hopper Clock

    Behind the Dispenser circuit, place two Hoppers facing into each other to form a rapid hopper clock and drop 1 filler item (like dirt) inside. Place a Comparator reading one of the clock Hoppers pointing toward a solid block with Redstone Dust to power the Dispenser.

  7. Place the Water Source

    Surround the open space directly in front of the Dispenser (above the Brewing Stand's back Hopper) with solid blocks and a top slab in front of the Barrel, then place a Water Bucket in that 1-block pocket and cover the top with a block.

  8. Pre-fill the Dispenser and Filter Hoppers

    Fill all 9 slots of the Dispenser with full stacks of empty Glass Bottles. In the two input Hoppers coming from the Barrel, place 1 filler block (like Cobblestone or Dirt) in each of the last 4 slots and a stack of empty Glass Bottles in the first slot.

  9. Build the 17-Dropper Ingredient Row

    Extend a row of 16 blocks sideways from the block beside the Brewing Stand. Place an upward-facing Dropper behind each block (17 upward Droppers total) and connect a straight line of Hoppers across the top of all of them leading directly into the top of the Brewing Stand.

  10. Add Buttons, Item Frames, and Ingredients

    Attach Buttons to the front blocks corresponding to the Blaze Powder Dropper and all 17 ingredient Droppers, place Item Frames above them to label your ingredients, and load each Dropper with potion ingredients.

How it works

This station combines a top-fed ingredient selector with an automated water bottle refiller controlled by two comparator safety locks:

  • Ingredient Delivery: Pressing any front button powers the block it sits on, triggering the upward-facing Dropper behind it. The item shoots up into the overhead Hopper chain and funnels straight into the top of the Brewing Stand in the exact order you press the buttons.
  • Auto Water Bottle Filler: The Dispenser is completely filled with 9 stacks of empty Glass Bottles. When pulsed by the 2-hopper clock, it converts an empty bottle into a Water Bottle using the enclosed water source block. Because there are no empty slots inside the Dispenser, the filled Water Bottle is spat out into the water stream and collected by the Hopper feeding the side/back of the Brewing Stand.
  • Full-Capacity Cutoff: When the Brewing Stand and its back Hopper are completely backed up with Water Bottles, the Redstone Comparator reading that Hopper outputs a strong enough signal to overcome the subtracted signal from the activated Lever, locking the hopper clock above it so the Dispenser stops firing.
  • Empty-Bottle Cutoff: The two input Hoppers beneath the Barrel have their last four slots blocked with dummy items so they only accept empty Glass Bottles in the first slot. If the input hopper runs out of bottles, its Comparator turns off, allowing the Redstone Torch to turn back on and lock the hopper clock before the Dispenser can deplete its internal 9-stack buffer.

Tips & variations

  • Never Let the Dispenser Empty a Slot: Make sure all 9 slots of the Dispenser have Glass Bottles and the two feed Hoppers have their last 4 slots plugged with dummy items before turning the clock on. If a slot inside the Dispenser empties, it will keep the filled Water Bottle inside itself instead of shooting it into the Brewing Stand's Hopper.
  • Queue Ingredients in Order: Because a standard hopper line moves one item at a time from across the array, press your buttons from left to right (or pause briefly between presses) starting with Nether Wart, followed by your primary ingredient, and finishing with modifiers like Redstone, Glowstone, Gunpowder, or Dragon's Breath.
  • Customizing Width: The build is 19 blocks wide to fit 17 different brewing ingredients, but you can easily shorten or lengthen the row of upward Droppers and Hoppers to fit your base layout.

Frequently asked questions

Why is the dispenser keeping the water bottles instead of putting them in the hopper?
All 9 slots inside the dispenser must remain occupied by at least one empty glass bottle. If even one slot becomes empty, the newly filled water bottle will go into that empty dispenser slot instead of being ejected into the hopper.
Why do we put cobblestone and dirt in the last four slots of the input hoppers?
Blocking the last four slots with single non-bottle items prevents you from having to fill all five hopper slots with stacks of glass bottles just to keep the system running, and ensures the empty-supply lock activates cleanly when the first slot runs out.
Does this potion brewing station work on both Java and Bedrock Edition?
Yes, this design uses basic hopper clocks, comparator signal strength, and direct dropper powering without quasi-connectivity, making it functional on both Java and Bedrock Editions.

Components used

More base automation