Quasi-Connectivity

Quasi-connectivity (QC) is a property of pistons, sticky pistons, dispensers, and droppers that lets them be activated by anything that would activate the block space directly above them. It works even if the space above is empty air or a transparent block. Because the power source can be outside normal block-update range, QC can either trigger a component immediately or leave it waiting for a nearby block update.

Block UpdatesIntermediateQuasi-connectivityBlock update detector (BUD)Piston mechanics

What Is Quasi-Connectivity?

Quasi-connectivity (often abbreviated as QC, or called piston connectivity, indirect power, or BUD-powering) means a component checks the block space directly above itself for power in addition to its own space. You can think of it like a two-block-tall door: powering the top half of a door also activates the bottom half. With QC, pistons, sticky pistons, dispensers, and droppers behave as if they have an invisible top half sitting in the space above them.

It does not matter what is actually occupying that space above the component—even if it is completely empty air or a transparent block like a slab, anything that would normally activate a mechanism in that upper space will also activate the piston, dispenser, or dropper below it.

Exact Rules: Immediate vs. Update QC

First, remember how any normal mechanism component is activated:

  • An adjacent active power component (except a redstone torch attached directly to the mechanism, or a power source directly in front of a piston).
  • An adjacent powered opaque block (strongly or weakly powered).
  • A powered redstone repeater or comparator facing directly into the space.
  • Powered redstone dust pointing at the space, sitting on top of it, or in a directionless dot/cross next to it.

If any of those four rules are met for the space above a piston, dispenser, or dropper, the component can be activated by QC. However, redstone components only send block updates up to a maximum of 2 spaces away. This creates two distinct types of QC:

  • Immediate QC Activation: The power source activates the space above the piston (1 block away from the source) and also sends an update that reaches the piston itself (2 blocks away). Components like redstone dust, redstone torches, repeaters, and comparators update all redstone components up to 2 blocks away by taxicab distance. Wall/floor attachments (such as levers, buttons, pressure plates, or trapped chests acting on the block below them) placed on an upside-down slab above a piston also update neighbors of their attachment block, triggering the piston immediately.
  • Update QC Activation: A redstone component powers a solid block diagonally above or two blocks above the piston. Because the redstone power source is 3 spaces away from the piston, its update does not reach the piston. The piston is now powered by QC, but "doesn't know it yet"—it will stay unextended (or stay extended after power turns off) until it receives a separate block update.

How to Trigger a QC-Powered Component

When a piston, dispenser, or dropper is waiting in an Update QC state, any of the following actions will wake it up:

  • Placing, breaking, or moving any block directly adjacent to the component.
  • Changing the block state of an adjacent block (such as adjusting the delay on a repeater next to the piston).
  • Changing the state of a redstone torch within 2 spaces of the piston.
  • Changing the power level (not just the orientation) of redstone dust within 2 spaces of the piston.
  • Changing the power level (not the delay) of a repeater facing a space directly next to the piston.
  • Changing the power level or operating mode of a comparator facing a space directly next to the piston.

Step-by-Step Build: Simple QC BUD Switch

You can demonstrate Update QC and build a basic Block Update Detector (BUD) in a few seconds:

  1. Place a sticky piston on the ground facing horizontally (or facing straight up).
  2. Leave the block space directly above the piston completely empty (air).
  3. Place one solid opaque block diagonally above the piston (one block up and one block to the side), or two blocks directly above it.
  4. Attach a lever to that solid block and flip it ON. The solid block is now powered, which activates the air space above the piston, but because the lever is 3 spaces away from the piston, the piston does not extend yet.
  5. Place any block next to the piston. The piston receives a block update, realizes it is powered via QC, and immediately extends.
  6. Flip the lever OFF. The piston will remain stuck in the extended position until you break or place another block next to it.

Variation: Place a sticky piston facing straight up with a block of redstone on its head. Power the piston briefly from the side and turn the power off. When the piston extends, the redstone block moves into the space two blocks above the piston base, powering the space above the piston by QC and locking the piston extended until it receives a block update after the redstone block is removed.

How Players Use and Exploit QC

  • Compact Piston Walls & Flush Doors: You can power a 2-high stack of pistons using a single line of redstone blocks or repeaters running along the top row. The top row powers normally while the bottom row powers simultaneously via Immediate QC.
  • Block Update Detectors (BUDs): Before observer blocks were used, Update QC was the standard way to detect crop growth, block placement, or furnace state changes without visible wiring next to the target block.
  • Moving Redstone Block Circuits: Because a block of redstone cannot be turned off, moving it with another piston into a position diagonally above or two blocks above a piston lets you toggle Update QC lines on and off when paired with an update line.

Common Mistakes and How to Fix Them

  • Pistons Refusing to Retract: This is the #1 beginner headache. If a piston extends and stays stuck after you turn off its main line, check the block diagonally above it and the block two spaces above it. You likely have a powered solid block or redstone line running above your build that is holding the piston on via QC.
  • Accidental Solid Blocks Above Pistons: Running redstone dust over a solid block two spaces above a piston will QC-power the piston without updating it. Fix this by replacing the solid block with an upside-down slab or transparent block so the block itself cannot become powered.
  • Tripwire Hook Confusion: Unlike levers or buttons placed on the bottom face of a block, a tripwire hook only attaches sideways and cannot attach to a block beneath it, meaning it cannot be used the same way for downward immediate QC activation.

Frequently asked questions

Is quasi-connectivity a bug or an intended feature?
While quasi-connectivity originally seemed like a bug and can be tricky to build around, the developers recognize it as a permanent feature that works as intended.
Which redstone blocks are affected by quasi-connectivity?
Only pistons, sticky pistons, dispensers, and droppers are affected by quasi-connectivity. Other mechanisms like redstone lamps, doors, and hoppers are not.
Why does my piston stay extended after the redstone turns off?
Your piston is being powered by quasi-connectivity from a block diagonally above it or two blocks above it, or it lost QC power from a source 3 blocks away and is waiting for a block update next to it to realize it should retract.
How do I stop quasi-connectivity from powering my pistons by accident?
Reroute redstone wires so they do not power solid opaque blocks diagonally above or two blocks above your piston, or replace those solid blocks with transparent blocks like upside-down slabs.

Components involved

More redstone mechanics