
Video: Twilight Zone Doorbell - Note Block "Tutorial" (Minecraft Xbox/Ps3) by Fed X Gaming
How to build it
- Dig the Trench and Wire Input
Dig a trench at least 3 blocks deep underneath your door and button so you can cover the floor later while leaving an air gap above the note blocks. Run redstone dust from the block behind your doorbell button down to the starting point of your note block line.
- Place the First Note Pair (16 & 15)
Place your first Note Block at the end of the redstone dust wire and hit it 16 times to tune it. Place a second Note Block directly to the left of the first one and hit it 15 times.
- Place the Second Note Pair (16 & 14)
Place a Redstone Repeater coming out of the first note block and set it to a 2-tick delay (click it once). Place a Note Block in front of the repeater tuned to 16 hits, and another Note Block to the left of it tuned to 14 hits.
- Place the Third Note Pair (16 & 10)
Place another Redstone Repeater coming out of the previous main-line note block and set it to a 2-tick delay. Place a Note Block in front of this repeater tuned to 16 hits, and place a Note Block to the left of it tuned to 10 hits.
- Place the Fourth Note Pair (16 & 14)
Add one more Redstone Repeater on a 2-tick delay coming out of the third main-line note block. Place a Note Block in front of it tuned to 16 hits, and place a final Note Block to its left tuned to 14 hits.
- Extend and Loop the Pattern
Because the melody is just four repeating chords, add another 2-tick repeater and build the exact same 4-step sequence (main line: 16, 16, 16, 16; left side: 15, 14, 10, 14) as many times as you want the chime to play.
How it works
This doorbell relies on dual-note harmonies and uniform timing to recreate the classic eerie arpeggio:
- Dual Note Triggering: When a
Redstone Repeaterpowers the primaryNote Blockin the main line (always tuned to 16), that note block becomes strongly powered. It automatically powers the adjacentNote Blockplaced directly to its left, causing both notes to play simultaneously as a two-note chord. - Timing: Every pair of note blocks is separated by a
Redstone Repeaterset to a 2-tick delay, which creates the steady, rhythmic tempo of the theme. - Pitch Pattern: The main line stays on a constant anchor pitch (16) across all four steps, while the harmony blocks to the left follow a simple four-step sequence: 15, 14, 10, 14.
Tips & variations
- Easy Memory Trick: You don't need to re-check a guide every time you extend the song. Just lay down blocks of four 16s along your main repeater line, then tune their left-side neighbors to 15, 14, 10, 14.
- Turning Corners: To save space and wrap the circuit back around underground, use two repeaters set to 1-tick delay each when making the turn. Two 1-tick repeaters equal the exact 2-tick delay needed between notes.
- Keep Air Above Note Blocks: Always ensure there is at least one block of empty air directly above every note block, otherwise they will be muted and make no sound.
- Ground Blocks: For the standard piano/harp instrument sound used in the video, place your note blocks on dirt, grass, or similar default blocks (avoid wood, stone, sand, or glass underneath).


