Slime and Honey Block Mechanics

Slime blocks and honey blocks stick to adjacent blocks when moved by a piston, allowing a single piston to push or pull a multi-block structure at once. While both share the same 12-block piston push limit, they do not stick to each other, and they behave differently with redstone signals and entities.

Piston MechanicsIntermediatePiston mechanicsQuasi-connectivityZero-tick

What Slime and Honey Blocks Do in Redstone

Normally, a piston pushes a single line of blocks directly in front of its head, and a sticky piston can only pull back the single block touching its face. Slime blocks and honey blocks extend this grip sideways and vertically: whenever a piston pushes or pulls a slime or honey block, that block tries to drag along every movable block touching any of its six faces.

If one of those neighboring blocks is another block of the same type (slime touching slime, or honey touching honey), the grip chains outward through the entire connected cluster. This allows you to move large doors, platforms, and self-propelled flying machines using just one or two pistons.

Exact Sticking and Piston Rules

Both blocks follow strict rules when moved by a piston:

  • The 12-Block Push Limit: A single piston can move at most 12 blocks in one action. That count includes every slime or honey block in the cluster, every block stuck to their sides, and any extra blocks pushed in front of those stuck blocks. For example, a 2×2×3 prism of slime blocks equals 12 blocks and can only move if no other movable blocks touch it.
  • Chain Pushing: Blocks carried along by slime or honey also push whatever is in front of them in the direction of travel, just as if a piston were pushing them directly.
  • Non-Stick Blocks: Slime blocks and honey blocks do not stick to each other, though they can still push each other if one is directly in front of the other. Neither block sticks to glazed terracotta or to any block that a sticky piston cannot normally pull.
  • Immovable Obstacles: If a slime or honey block is touching an immovable block (such as obsidian or a furnace) on its side, it simply slides past and ignores the immobile block. However, if an immovable block sits directly in front of the moving structure—or blocks a normal block that the slime or honey is trying to drag along—the entire piston movement fails. When a sticky piston tries to pull a blocked cluster, the piston head retracts empty without pulling anything.
  • Passive Behavior: Moving a normal block next to a stationary slime or honey block does not drag the slime or honey along. Likewise, a regular (non-sticky) piston cannot pull a slime or honey block.
  • Liquids: Water and lava do not block movement; pushed or pulled blocks move into the liquid's space and usually destroy it.
  • No Self-Loops: A piston cannot push or pull itself using a loop of slime or honey blocks attached to its own body.

Slime vs. Honey: Key Differences

Choosing between slime and honey in a build comes down to three mechanical differences:

  • Redstone Signal Transmission: Slime blocks are solid opaque blocks. They can be powered by repeaters or observers and transmit redstone power to adjacent components. Honey blocks are transparent (with a slightly inset 14×14×15 pixel hitbox) and cannot carry a redstone signal.
  • Moving Entities with Pistons: When a piston pushes a slime block into an entity, the entity is launched away (achieving slightly over 6.4 blocks of vertical lift when pushed upward, or 3.510 blocks sideways across normal blocks or air). Pulling a slime block does not launch entities. In contrast, when a piston moves a honey block, any player, mob, or entity standing on its top surface is carried smoothly along with the block rather than launched.
  • Surface Physics: Landing on a slime block negates fall damage and bounces the entity upward (up to a maximum bounce height of 57.625 blocks; holding Jump performs a normal jump, while sneaking prevents bouncing and deals full fall damage). Walking on slime slows players to 1.359 m/s (about a 70% speed reduction). Honey blocks reduce fall damage by 80%, slow walking speed to 2.508 m/s (about a 60% reduction), cut jump height by 85% (which also applies through carpets, bottom slabs, and daylight detectors on top), and let entities slide slowly down their vertical sides without taking fall damage.

Step-by-Step Build: 6-Block Two-Way Flying Machine

You can demonstrate block sticking, observer power transmission, and piston pulling by building a classic 6-block two-way flying engine in the air:

  1. Place a slime block in midair (at least two blocks off the ground so it does not grab the floor).
  2. Attach a sticky piston to one side of that slime block, facing into a second slime block placed directly in front of the piston head.
  3. On the opposite side of that second slime block, place a second sticky piston facing back toward the first slime block. You now have two 1×2 units sitting side-by-side in opposite directions.
  4. Place an observer next to each sticky piston so that the observer's output (the red dot) faces directly into the adjacent slime block. Because slime blocks conduct redstone power, each observer will power its slime block, which in turn powers the neighboring sticky piston.
  5. To fly: Cause a block update in front of either observer's face (for example, by placing and breaking a temporary block or striking it with flint and steel). That observer pulses its slime block, causing the piston to push the front half forward; the other observer detects being moved and fires its piston to pull the rear half along. The machine will fly continuously until it hits an immovable docking station.

Note: If you replace the two slime blocks in this exact 6-block layout with honey blocks, it will not work unless you reorient the observers to point directly into the pistons, because honey blocks cannot transmit the observer's signal.

How Players Use and Exploit Them

  • Tiling Larger Doors and Farms: Because slime and honey do not stick to each other, technical builders alternate rows or panels of slime blocks and honey blocks right next to each other. Each strip operates as an independent 12-block piston group without dragging its neighbor along, making seamless 4×4, 5×5, or larger piston doors and wide crop-harvesting sweepers possible.
  • Flying Machine Extensions: To move structures larger than 12 blocks in a flying machine, builders attach secondary pistons (extensions) that push or pull separate slime or honey segments in sequence, dividing the total block count across multiple pistons.
  • Passenger and Entity Transport: Slime flying engines sometimes cause riding players to glitch and fall through due to lag. Adding honey blocks to the top of a flying machine lets players and mobs stand on the machine and be towed along safely without jumping off.
  • Slime Launchers and Bouncers: Piston-driven slime blocks launch players, mobs, items, falling blocks, boats, and minecarts. Placing carpets, rails, pressure plates, trapdoors, repeaters, or comparators on top of a stationary slime block still allows entities to bounce while triggering or using the component on top.

Common Mistakes

  • Touching the Ground or Walls: A slime or honey line sliding along a floor of dirt or stone will try to grab the floor blocks, which then try to push the entire row of ground in front of them, instantly exceeding the 12-block push limit and stalling the piston. Line the path with air, obsidian, furnaces, or glazed terracotta.
  • Powering Through Honey Blocks: Treating a honey block like a slime block and pointing a repeater or observer into it to power an adjacent piston will fail because honey is transparent.
  • Using Normal Pistons to Pull: A regular piston can push a slime or honey cluster, but when it retracts it leaves the slime or honey behind. Only a sticky piston can pull a slime or honey block back.
  • Covering Slime with Slabs: While carpets, trapdoors, and pressure plates preserve a slime block's bounce, placing half-blocks like slabs or cakes on top completely stops the bouncing effect. Conversely, placing carpets or bottom slabs on top of honey blocks still restricts the player's jump height.

Java vs Bedrock

TopicJava EditionBedrock Edition
Two-way flying machine extensionsAn observer powering a sticky piston can push a segment on a short pulse and retract without pulling it back (block spitting), enabling compact two-way extensions.Sticky pistons never drop their block on a short pulse and cannot be zero-ticked, so flying machine extensions must be split into separate leading and trailing designs.

Frequently asked questions

Do slime blocks and honey blocks stick to each other?
No. Slime blocks only stick to other slime blocks and normal movable blocks, while honey blocks only stick to other honey blocks and normal movable blocks. You can slide a line of slime blocks directly past a line of honey blocks without them grabbing each other.
How many blocks can a piston push with slime or honey blocks?
The standard piston push limit of 12 blocks still applies. The total number of slime or honey blocks, plus every adjacent block stuck to them, plus any blocks being pushed in front of the structure cannot exceed 12 blocks per piston.
Why won't my observer or repeater power a piston through a honey block?
Honey blocks are transparent blocks with a 14×14×15 pixel collision box, so they cannot conduct redstone signals. Only slime blocks are solid blocks capable of transmitting redstone power to adjacent pistons.
Which blocks don't stick to slime or honey blocks?
Glazed terracotta and the opposite sticky block (honey next to slime) do not stick to the sides of moving slime or honey blocks, even though a piston can push them from behind. Immovable blocks like obsidian and furnaces are also ignored when touching the sides.

Components involved

More redstone mechanics