How the Sculk Sensor Works
A Sculk Sensor listens for game events—such as footsteps, block changes, explosions, or container interactions—within an 8-block spherical radius. When an event occurs, a vibration particle travels through the air from the source to the sensor at a speed of 1 block per game tick (20 blocks per second).
The block cycles through three distinct phases defined by its sculk_sensor_phase block state:
- Inactive: The sensor is waiting for a vibration.
- Active: Once the vibration particle arrives, the sensor activates and emits a redstone signal. While a vibration is traveling toward it or while it is active, the sensor cannot process any new vibrations.
- Cooldown: Immediately after being placed or after deactivating, the sensor enters a brief cooldown phase where it ignores all vibrations. This built-in buffer prevents a mechanism that the sensor just powered (like a closing piston door) from infinitely re-triggering the sensor when it turns off.
Sculk Sensors emit two different types of redstone values depending on how you read them:
- Direct Redstone Output (Distance): The block itself outputs a signal strength from
1to15inversely proportional to the distance the vibration traveled. An event directly on top of the sensor yields a full strength of 15, while events near the edge of the 8-block radius produce weak signals. - Comparator Output (Frequency): A Redstone Comparator facing away from the sensor ignores distance and instead outputs a signal strength from
1to15corresponding to the category of the vibration.
Sculk Sensors ignore vibrations produced by the Warden and other sculk blocks. Furthermore, players who hold sneak will not produce vibrations when walking, falling, or landing.
Vibration Frequencies (Comparator Output)
Every detectable event in Minecraft is assigned a frequency between 1 and 15. By reading the Sculk Sensor with a comparator, you can filter for specific player or mob behaviors:
- Frequency 1: Walking/stepping, swimming, boat paddling, bat flapping.
- Frequency 2: Projectiles landing, entities hitting the ground after a jump/fall, splashing into water or bubble columns.
- Frequency 3: Shooting projectiles, finishing an item interaction (shield, spyglass, bone meal), playing a goat horn.
- Frequency 4: Gliding with elytra, unequipping armor (player or armor stand), entity actions (ravager roaring, wet wolf shaking).
- Frequency 5: Dismounting an entity, equipping armor.
- Frequency 6: Mounting an entity, interacting with/breeding entities, shearing sheep.
- Frequency 7: Entity taking damage (excluding armor stands).
- Frequency 8: Drinking potions/milk or eating food.
- Frequency 9: Closing containers (chests, shulker boxes, hoppers), closing doors/trapdoors/fence gates, deactivating levers/buttons, detaching tripwire.
- Frequency 10: Opening containers, opening doors, activating levers/buttons, attaching tripwire, priming TNT or creepers, playing a note block.
- Frequency 11: Block state changes (inserting books into a chiseled bookshelf, turning lectern pages).
- Frequency 12: Breaking blocks, picking up fluids (water, honey, powder snow).
- Frequency 13: Placing blocks, placing fluids.
- Frequency 14: Teleporting (endermen, chorus fruit, shulkers), lightning strikes, spawning entities (spawn eggs, armor stands, evoker fangs).
- Frequency 15: Explosions (TNT, creepers, end crystals, beds), entity death (including armor stands breaking and fireworks finishing).
Placement, Wool Occlusion & Waterlogging
Sculk Sensors generate naturally in the Deep Dark biome and Ancient Cities, and can also be generated at a 9% rate on top of sculk blocks when a mob dies near a Sculk Catalyst. To pick one up, you must mine it with a tool enchanted with Silk Touch (a hoe mines it fastest); mining it without Silk Touch destroys the block and drops 5 XP.
Controlling what a Sculk Sensor can and cannot hear is essential for building reliable circuits:
- Wool Occlusion: Placing wool blocks between a vibration source and the sensor blocks the signal. If the line connecting the center of the source block and the center of the sensor passes through any wool block, the vibration is completely muffled. Walking or dropping items on top of wool or carpet produces no vibrations, and dropping wool or carpet items themselves is also undetectable.
- Silencing with Water: Placing water inside the same block space (
waterlogged=true) makes the Sculk Sensor completely silent. It will still detect vibrations and output redstone power normally, but its tendrils will not make clicking noises—ideal for hidden bases and traps. - Shrieker Alarms: If a player triggers a Sculk Sensor, it forwards a signal to any Sculk Shrieker within 8 blocks. You can prevent a sensor from alerting a shrieker by placing wool along the line of sight between the sensor and the shrieker.
Common Redstone Circuits
- Automatic Proximity Doors: Place a Sculk Sensor underneath the floor near a piston door and surround the sides facing the pistons with wool so the door's own movement is muffled. Walking near the door triggers the sensor without needing pressure plates or buttons.
- Long-Range Wireless Redstone (Amethyst Resonance): When a Sculk Sensor activates, any adjacent Block of Amethyst re-emits the exact same vibration frequency from its own position. By alternating Sculk Sensors and Blocks of Amethyst in a line (separated by up to 8 blocks and shielded with wool to enforce direction), you can transmit a specific frequency wirelessly across long distances.
- Action-Specific Secret Inputs: By pairing a Sculk Sensor with a comparator and a signal-strength decoder (often called a "redcoder"), you can build hidden entrances that only open when a player performs a specific action nearby—such as eating food (Frequency 8), using a spyglass (Frequency 3), or equipping a piece of armor (Frequency 5).
- Upgrade to Calibrated Sculk Sensor: If a standard sensor reacts to too many unwanted ambient sounds, combine it at a crafting table with three Amethyst Shards to craft a Calibrated Sculk Sensor, which natively filters for a single chosen frequency and runs on a faster cycle.
Tips, Quirks & Common Mistakes
- Immovable by Pistons: Sculk Sensors cannot be pushed or pulled by pistons or sticky pistons, and they do not stick to moving slime blocks or honey blocks. You can use them as immovable stop-blocks for flying machines if they are wool-shielded or waterlogged.
- Self-Triggering Loops: Although the cooldown phase ignores the immediate deactivation of an adjacent component, delayed redstone lines (such as long repeater chains) can fire after the sensor's cooldown finishes, trapping your circuit in an endless clock loop. Always use wool between the sensor and the mechanism it powers.
- Actions That Do Not Make Vibrations: Not every block update produces a vibration. Changing the delay on a repeater, toggling a comparator's mode, redstone dust changing shape, flowing water or lava breaking fragile blocks (like rails or redstone dust), dyeing signs, using bone meal directly, or failed dispenser activations will not trigger a Sculk Sensor.
- 7-Block Edge Case: A few specific events—placing or breaking armor stands, using spawn eggs, and falling blocks solidifying into blocks—fail to register when they occur at a distance of exactly 7 blocks from the sensor.
